Electronics Forum | Sat Feb 17 13:15:09 EST 2007 | gregcr
Hi All, We have a handfull of GSM's here and some are newer than others. I was wondering what the options are as far as upgrades to the VME chasis. We have our oldest running with EPC-4, EPC-5, EPC5A and so on.... Can newer EPC units be used in t
Electronics Forum | Sun Dec 19 23:22:11 EST 2010 | Jacki
Hi Rem Woo, ur board is such long one,7'. Our PCB is only 2' long but 3.5kg weight b4 solder. We use wave machine to solder it and PCB was sit on the pallet. all PCB side lengths are pressed by clamps. PCB was flat just after wave, however there was
Electronics Forum | Thu Jul 29 11:14:46 EDT 1999 | Justin Medernach
| I'm working on a prototype board that requires a 600 pin BGA. This is a metal top BGA being placed on a 11" x 17" PCB about .62" thick. | | The part is 1.77" square with a 50 mil pitch and 30 mil bump diameter. The bumps are located on the
Electronics Forum | Tue Oct 14 10:52:35 EDT 2014 | swag
Can't help you with the manual but do have some tips: If it was shipped, it's possible someone tied axis or blocked stuff for shipping. Look for that. Look for bent sensor flags + go into I/O and check to see all sensors you can find are working.
Electronics Forum | Sat Oct 18 22:41:54 EDT 2014 | pfifla1
Can't help you with the manual but do have some > tips: If it was shipped, it's possible someone > tied axis or blocked stuff for shipping. Look > for that. Look for bent sensor flags + go into > I/O and check to see all sensors you can find a
| 1 |
