Electronics Forum | Thu Mar 24 12:59:14 EST 2005 | DasonC
Desicattor is used for storage and not the indicator or meter to check the humidity. I am not sure that the HIC will affect the solderability, if yes, when they pack together with the MSD then we also have solderability problem on component. Per J-
Electronics Forum | Tue Apr 05 12:45:01 EDT 2005 | cyber_wolf
Make sure your matrix tray is up high enough. The components in the matrix tray should be at least at board level. Also check your component height in the package list. If all that is OK then, check those Z locks I spoke of earlier.
Electronics Forum | Wed May 25 05:21:43 EDT 2005 | ajaydoshi
Thanks, I will check & update. Checked Fan it is working fine. In this problem after power turn off if we start again their is no problem. Some time this problem occure at the start of day also ( no night shift production ) ajay
Electronics Forum | Mon Jun 06 11:56:45 EDT 2005 | ratsalad
Thanks for the leads. They both said they might have one and they are checking into it. I was right the first time! All three cameras are the same. It was the Panasonic help desk that told me they were not. Checking in the manual shows all three
Electronics Forum | Thu Jul 21 08:58:48 EDT 2005 | Rob
Hi, Has anyone got any experience with Lead Check or any other type of swab system for checking the presence of lead on a component or assembly? http://www.leadcheck.com/CircuitBoard.shtml Cheers, Rob.
Electronics Forum | Sun Jul 31 18:32:30 EDT 2005 | crishan
Thanks you for the information LUPO, specially with component minimum clearance. I will also check the XY table for movement accuracy. What specific parameters do you check with your SPC charts. Thanks Crishan
Electronics Forum | Thu Sep 08 03:45:22 EDT 2005 | geb
Yes, unfortunately it is the PEC camera which checks Fids and is used for Feeder Teach. I have found that you do need a service check before you can register with UIC. Do you have access to their database still? Thank you
Electronics Forum | Wed Jul 26 16:36:56 EDT 2006 | John S.
We're getting our first AOI machine up and running. How are companies handling the need to check the machine's ability to catch defects at setup/changeover? It seems nearly impossible to verify that the machine is still effectively checking each of
Electronics Forum | Wed Aug 23 14:44:07 EDT 2006 | johnw
They are various way to debug this problem, try booting into mecha check, The cpu wouldnt cause a vp error all that is related to the VP are 3 cards the gognex the vp card and the memry backup card. If this fails print out the trace machine code and
Electronics Forum | Thu Sep 07 09:08:57 EDT 2006 | Bubba
OK, part touching paste before reflow? Check part. Maybe bad plating. Check reflow profile by slowing conveyor.