Electronics Forum | Wed Dec 15 01:25:14 EST 1999 | Bubba
Larry, What has been removed from the machine lately. Most bearings don't just fall apart while running without giving some type of warning. My experiance with LM bearings is they usually don't just fall out, most cases the bearing block was removed
Electronics Forum | Wed Dec 08 10:25:00 EST 1999 | John Thorup
Hi Ken Given the small mass of the dot I'm guessing that the adhesive is being flash cured by the heat of the board and the resulting semi-solid is unable to release from the nozzle like a liquid thereby causing your strings. Placing components on c
Electronics Forum | Thu Dec 02 09:56:32 EST 1999 | Larry Johnson
Okay, I believe that the XY table on our CP4-2 is not working correctly. When we place smaller parts (603,805,RNETS, etc...) they aren't seated in the paste all the way. Larger parts aren't a problem. They are kind of "floating" on top of the paste.
Electronics Forum | Thu Dec 02 09:45:02 EST 1999 | Larry Johnson
Okay, I believe that the XY table on our CP4-2 is not working correctly. When we place smaller parts (603,805,RNETS, etc...) they aren't seated in the paste all the way. Larger parts aren't a problem. They are kind of "floating" on top of the paste.
Electronics Forum | Wed Feb 13 17:29:16 EST 2002 | Sheri Connor
Hello Michael, I am new to this SMT Net Forum (sorry to reply so late!)and happened to plug in a search for "scanning". I wanted to make sure you have your questions answered. ScanCAD has the perfect system for you --- ScanPLACE. Please check ou
Electronics Forum | Thu Nov 04 07:53:45 EST 1999 | Chad Notebaert
Sounds like you have a component problem! I say this because you say the sodler is flowing away from the components (leads I assume) This sounds like none wetting of the component. Do a solderability test on the parts. Take the parts and dip the lead
Electronics Forum | Wed Nov 03 03:26:38 EST 1999 | Wes
We have Siemens S-20 machine whose other gantry occasionally missmounts all its components in Y-direction(approx. 1/2 mm ). Most of the missmounts happens when there is a lot of 0603 or 0805s (B-side glue boards). Gantry picks up the components OK bu
Electronics Forum | Thu Nov 04 19:51:28 EST 1999 | John
Thanks folks. The current vendor is doing an alcohol wash, top and bottom, then performing an ionic test on 100 boards. I'm not to confident in the testing because the readings for a "clean" board are 25 ugm/sq in and a "dirty" board are 40 ugm/sq in
Electronics Forum | Tue Nov 02 11:44:54 EST 1999 | Wolfgang Busko
Hi Pat, is the soldering Ok when you solder them by hand ? We use some larger ferrite beads with no problems in reflow but I must say that we use a vapour phase and only max 5 parts/PCB. They do have a high thermal capacity and you use a lot of them,
Electronics Forum | Mon Oct 25 22:27:53 EDT 1999 | SaiWong
I have two of the servo boards of the Fuji CP4-2 SMD3 version are mulfunctionaled. I don't know if it can be fixed or not. May be the moisture killed the board. A new one costs about USD 5,000 each. I wonder if anyone knows who or which company can