Electronics Forum | Fri Jul 20 17:09:10 EDT 2001 | davef
Circuits Assembly magazine 09/99 "Defluxing with Ultrasonics" by Les Hymes. [There's more but I can't find it right now. I'll add to this as I find the junk, er very nice stuff.] J-STD-001C states that its OK to use ultrasonics for cleaning so lon
Electronics Forum | Tue Jul 10 03:14:19 EDT 2001 | winnifred
Steven, Dave is right, wash them away. Since it is RMA paste, you may need to have a saponifier to go for Semi-aqueous washing. Or you may want to contact your supplier for a cleaner to wash it away with some agitation ( ultrasonic). Mag.
Electronics Forum | Fri Jul 20 10:35:34 EDT 2001 | slthomas
David, I've thought about doing this also with no clean boards that were poorly cleaned following a misprint (and subsequently reprinted, populated, and reflowed) but have shyed away because of the potential for damage to components from the ultraso
Electronics Forum | Tue Jun 24 12:26:33 EDT 2008 | dyoungquist
We are purchasing an ultrasonic cleaner to clean pcb asseblies that have been produced with water soluble flux based solder. After cleaning a batch of assemblies, the water in the cleaner will need to be disposed of. My question is: Do we need to
Electronics Forum | Tue Jul 10 18:03:49 EDT 2001 | pzohbon
Does anyone have a recommendation for a cleaning solution used in an ultrasonic cleaner for cleaning RMA solder paste off stencils and adhesive off pcb boards. I am going to be evaluating Armakleen 2001, Zestron Vigon SC 200, and Aqueous Technologies
Electronics Forum | Wed Jul 11 18:42:35 EDT 2001 | Darby
As I mentioned in the previous string we are happy with Electrolube "SSS". The guy who built our ulrasonic cleaners recommended it and it works very well. You don't have to change tanks or machines for a switch from paste to adhesive. It doesn't leav
Electronics Forum | Tue Jun 24 12:42:35 EDT 2008 | slthomas
Your flux residues may be acceptable for your drain, but the solder balls won't be. You'll need to filter and dispose of the filters per your local city, county, and state regs. Either that or just boil the water off and dispose of the dry remains wi
Electronics Forum | Tue Jun 24 13:46:21 EDT 2008 | bschreiber
I know it is not what you want to hear, but first and foremost, you must consult your local regulating agencies and here is why: Solder paste contains heavy metals. We are all familiar with the problems associated with lead, but lead free solder pas
Electronics Forum | Thu Oct 26 11:49:54 EDT 2006 | sms_don
CW, The good news is that you are not trying to use SAC paste with SnPb balls for that would be a void generator due to the ball being liquidous while the SAC paste is still in a flux cleaning stage. Two points to consider: One, voids are not an i
Electronics Forum | Fri Jul 06 03:23:01 EDT 2001 | kennyhktan
Hi there Steven ! Please allow me to share some of my problem we're facing here with you. Here are a few points that I suggest you should check on your current process:- (1)PCB - Component land partern design ? It is per IPC spec ? - Mask
.gif)
winsouce.jpg)
