Electronics Forum | Wed Feb 21 14:40:44 EST 2001 | billschreiber
Hello Mark, As with any cleaning process, there are a number of variables that will affect the cleaning of adhesives with a Smart Sonic Stencil Cleaner: brand of adhesive, concentration of cleaning chemistry, temperature of wash solution, etc. Both
Electronics Forum | Tue Mar 13 14:25:14 EST 2001 | Mike Konrad
Hi Kerry, I do not wish to turn this subject in to a debate, but consider this� If every technical question posted resulted in a commercial reply (company name, model number, phone number, price, features and benefits, etc), then there would be lit
Electronics Forum | Wed Mar 21 16:32:03 EST 2001 | mparker
The root cause is dependant on the type of solder "splash", ball, whatever, that you are seeing post reflow. If it is smears, then cleaning the stencil underside is probably the answer. Are you using automatic wipers? How many print cycles between w
Electronics Forum | Thu Oct 04 21:52:34 EDT 2001 | sjlevin
If you do not have one of the big in-line aqueous cleaners, then there is an easier way that is a lot less expensive. I suggest you try Asahi's AK-225T vapor degreasing solvent which has been around for 10 years now. And it is legal. If you have
Electronics Forum | Mon Oct 08 21:05:00 EDT 2001 | ksfacinelli
DO NOT Mix Technologies.... If you are using a no clean solder paste use a no clean wave solder process. I have direct experience with using a no clean paste and a RA water-soluble wave solder process. When cleaning with the water wash system your
Electronics Forum | Tue Jun 04 19:33:16 EDT 2002 | rob_thomas
Dave's estimation is pretty conservative but there is a lot of equipment out there and a lot of people happy to make a sale.Implementing both mentioned processes it's difficult and time consuming .Even if you get good training from whoever sells you
Electronics Forum | Wed Jul 11 20:24:00 EDT 2001 | davef
Well, your wipes are a good first step in removing the bulk of the material, but they do little or nothing to remove the material from the apertures. * It would probably be cheaper to use poly stencils and then throw them away after each use, eh? ;
Electronics Forum | Mon Dec 06 04:40:39 EST 1999 | cklau
Halo; In your last message you did not mentioned why your customer need to use IPA to clean PCB's as their requirement and what subtances they want to get rid of (is it flux stain PCB's or component?).If so recommend your value customer of flux 910
Electronics Forum | Fri Nov 12 05:14:42 EST 1999 | S L CHANG
We are currently cleaning solder paste (TAMURA SQ-1030FP) from stencil using an ultrasonic stencil cleaner with solvent (HYSPER-Non CFC). The process cycle time is 30 sec. cleaning in 1st ultrasonic tank and another 30sec. cleaning in 2nd ultrasonic
Electronics Forum | Fri Oct 22 11:25:03 EDT 1999 | Boca
I understand what you're looking for, criteria which determmines a good or bad finger. I have not found anything as cut and dried at that, we just eyeball them. If they are very bad they should stick out like a sore thumb. We check for them each s