Electronics Forum | Wed Jul 04 03:59:10 EDT 2018 | oxygensmd
I had similar problem before. I cleaned the PCs (both machine and station) and replaced the cooling paste on the CPU cooler. After time the Control was able to shut off - before the issue solved, we used the safety knob to cut the Control.
Electronics Forum | Wed Jul 04 04:04:19 EDT 2018 | oxygensmd
One more thing. We had a card defect during the control had this problem, on of TBF card burned out. But I think you need to check the thermal paste in the PC - clean the cooler and the filter first.
Electronics Forum | Tue Jul 10 13:01:02 EDT 2018 | john22hendy
Looking for any Preventative maintenance steps for SMD storage towers. The MyCronics Owners manual does not specify PM suggestions, however proper vacuuming, lubrication and lens cleaning is necessary. Does anyone have other items to suggest or a li
Electronics Forum | Tue Aug 14 08:09:32 EDT 2018 | buckcho
Try something drastic just for testing - turn off cleaning! Then check again the result. Trust me, you can be surprised.
Electronics Forum | Mon Aug 20 10:17:50 EDT 2018 | mefloump
Toluol (toluene). I use it in the solvent cups in my PVA machines to keep the nozzles wetted. We also use it to clean spots where coating is not supposed to be. Techspray 2510-N coating remover pen will also work very well for this.
Electronics Forum | Wed Oct 10 07:26:18 EDT 2018 | cyber_wolf
I do not agree with that. Stainless is typically used and it works fine. We run many different paste types, RMA, no clean, WS, PB, Pb Free. No sticking issues. You can spend the extra money and buy coated blades but it is not necessary for most ap
Electronics Forum | Fri Dec 14 23:10:05 EST 2018 | jandon
High quality coated blades are easier to clean but has zero affect to solder paste sticking.
Electronics Forum | Wed Oct 24 09:31:26 EDT 2018 | tech1
It could be the indicators inside the Z head, have you tried cleaning them? Can you post an image of the error that appears on the monitor?
Electronics Forum | Fri Mar 22 14:19:38 EDT 2019 | gregcr
Thank you ProcEng1 Nordson sent me a flux suggestion list: No Clean: 1. Kester Select 10 2. ALPHA EF-2210 3. AIM FX-16 Water Sol: KESTER 2331-ZX Nozzle Tinning: SUPERIOR #75
Electronics Forum | Fri Mar 29 07:53:12 EDT 2019 | davef
Why are you printing paste on test via? In the old days, we probed soldered pads to cushion impact force of probing. Is that still a reasonable practice?