Electronics Forum: cleaning copper (Page 1 of 25)

raw copper on pcb

Electronics Forum | Thu Jun 07 05:11:42 EDT 2012 | cp38260

Hi, I have pcbs (Duroid/RT 5880) with raw copper, soldered in vapour-phase chamber at 230 degrees Celsius. During soldering, copper gets tarnished. Cleaning with Vigon A250 removes the tarnished layer. Indeed, in the VigonA250 techn. datasheet it is

contamination on copper

Electronics Forum | Fri Apr 16 11:03:35 EDT 2004 | davef

Your copper corrosion is not good. It indicates that you have not done a good job in cleaning. [We assume this is a medium green color, not unlike the color of the solder mask on your board, that is almost like a translucent lacquer; rather than th

Lead free tin copper only

Electronics Forum | Sun Feb 05 09:29:12 EST 2006 | Cmiller

Look at: http://thor.inemi.org/webdownload/newsroom/Presentations/09.pdf Page 47 shows both alloys to be similar in reliability although its a little troublesome that the particular defects are not isolated as I feel there is a big difference betwee

Test vehicle for PWA cleaning

Electronics Forum | Tue Jun 26 19:48:29 EDT 2001 | davef

Information a SIR test vehicle can be found in IPC-9201, SIR Handbook [http://www.ipc.org]. Common test boards are: * IPC-B-24 (copper and HASL, FR-4 and polyimide) * IPC-B-36 (bare copper and HASL, FR-4 and polyimide) * IPC Phoenix board (bare copp

Disposal of ultrasonic cleaning water

Electronics Forum | Tue Jun 24 13:46:21 EDT 2008 | bschreiber

I know it is not what you want to hear, but first and foremost, you must consult your local regulating agencies and here is why: Solder paste contains heavy metals. We are all familiar with the problems associated with lead, but lead free solder pas

Re: Where can I purchase a PCB with a bare copper grid for solder flux evaluations.

Electronics Forum | Mon Aug 30 16:10:10 EDT 1999 | Dave F

I have looked through the IPC web page and surfed to frustration. Can somebody give me a lead? Brian: We don't use an etched board. We use a special stencil, described below and print on bare copper laminate. 3 Solder Wetting Test. Recogniz

how to solder manganin 0.05mm manganin wire to a copper plate

Electronics Forum | Thu Jan 29 09:18:36 EST 2015 | davef

Nichrome, manganin, phosphor bronze etc are easy to solder ... the hard part is removing the corrosion * Manganin: 86% copper, 12% manganese, 2% nickel. Often, it's used in making cryogenic measurements, due to its low heat loss. * Select a flux for

cleaning solution to clean socket board.

Electronics Forum | Mon Oct 16 00:45:33 EDT 2000 | soza

Dear sir, I have a problem to find the new chemical solution instead IPA(isopropyl alcohol) to eliminate contamination on the test pin socket board made from copper that plate with nickle and gold. And after the often testing IC process, the co

Cleaning Copper Surface

Electronics Forum | Tue Jan 26 12:25:44 EST 2010 | blnorman

You can try a 5% solution of sulfuric acid. It's used to clean copper foils to IPC-TM-650 method 2.3.15 prior to testing for purity.

Cleaning Copper Surface

Electronics Forum | Tue Feb 02 11:59:20 EST 2010 | stepheniii

How about sanding then plating fresh copper?

  1 2 3 4 5 6 7 8 9 10 Next

cleaning copper searches for Companies, Equipment, Machines, Suppliers & Information