Electronics Forum | Wed Oct 10 16:50:44 EDT 2001 | jeff
The "UP100 " is currently built by Speedline. However only the models UP100S (No Vision and manual adjust table ) and the UP 100MV (Vision and manual adjust table). These are batch printers not in-line. The IS model has been out of production for ab
Electronics Forum | Wed Nov 24 16:08:09 EST 2004 | Terrapin Station
This depends on the model. Most machines and turret style typically overstroke .2mm with a force of 250 - 300 grams of force. the reason for the over stroke is to place the component into the paste. This can be adjusted through part library manipul
Electronics Forum | Fri Feb 09 03:14:19 EST 2007 | Pana user
Have you tried using PanaPro software to do optimization? Pick and Throw? Try adjusting the recog lighting..
Electronics Forum | Fri Jan 25 05:22:47 EST 2008 | dekiper
Hi, You could try other types without brass shim. It's also important to use a good tool that is adjusted properly. Contact me and I will help you with quality samples and instructions. http://www.dekitools.com // Per Gester
Electronics Forum | Thu Jul 14 10:29:53 EDT 2005 | stepheniii
It can be used as a sales tool. Choose a CPK you want, then "adjust" your definitions and limits untill you achieve that. Just be prepared to explain that someone who is unavailable for explainations set up the SPC system, and you are just following
Electronics Forum | Fri Mar 03 13:51:17 EST 2006 | Chunks
We've looked at our stencil under magnification after hand cleaning. There is some paste left behind. Machine washing removes all of the paste. Your best bet is to clean like normal, then look at the aps under magnification. Adjust accordingly (a
Electronics Forum | Thu Jul 14 16:05:55 EDT 2005 | russ
Good answer slthomas! This has got to be the biggest misconception out there. To perform SPC on a wave process you must first perfrom DOE to determine the critical parameters and or control limits. For example you will need temp reading devices tha
Electronics Forum | Thu May 10 15:11:53 EDT 2001 | jdtpfacreate
Paul, My company offers an excellent solution for low volume/high mix applications. The issue always becomes how can you reduce downtime/changeover. There are few features on our machines that allow you to do this effectively: -Load feeder
Electronics Forum | Wed Aug 23 14:59:32 EDT 2006 | bill
I�ve been lurking on the forum for a while so I will take a stab at this, mainly because there is no answer I take it that you have a variety of boards being produced at the same time and are in fixtures so the conveyors don�t need to be adjusted, a
Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox
R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp
