Electronics Forum | Wed Jun 16 09:46:02 EDT 2004 | blnorman
Have you considered spraying the coating? Check with the manufacturer of the epoxy to see if they recommend any equipment and whether or not the coating would have to be mixed with solvent to provide a smooth, thin even coat.
Electronics Forum | Thu Jan 13 09:18:28 EST 2005 | davef
We agree that coating BGA solder balls with conformal coat is a bad idea due to differences between the z-dimension thermal expansion between the conformal coat and solder.
Electronics Forum | Fri Jan 14 17:09:21 EST 2005 | Bob R.
Whether or not conformal coating creates a reliability problem if it bridges the gap between the board and bottom of the part depends on the properties of the coating. A low modulus coating is fine, but one thats modulus increases at colder temperat
Electronics Forum | Thu Nov 15 10:07:43 EST 2007 | davef
Dip the tool handles in a colored plastic coating material, like: * Plasti-Coat Plastisol Coating * Aervoe Polyshield Protective Coat
Electronics Forum | Tue Aug 30 09:49:24 EDT 2011 | blnorman
Guess the better question is why are the resistors and FETs heating to the degree that they discolored the coating? If the coating is discolored, I'd be concerned with the possibility of cracking as dave mentioned. Cracks defeat the purpose of the
Electronics Forum | Tue Sep 20 05:21:41 EDT 2016 | abhilash4788
Hi, Currently we are facing bubble formation in conformal coatings in the pcba. Have varied various specs of the conformal coating machine, even during manual application also having the same issue. the material used is silicone conformal coating. N
Electronics Forum | Mon Aug 20 09:49:57 EDT 2018 | dontfeedphils
Not entirely clear on your question. We don't coat any of our hardware (assemblies are coated prior to hardware installation), so if coating needs to be reworked after this, then hardware removal is needed.
Electronics Forum | Tue Jan 13 16:40:03 EST 2004 | Jacob Lacourse
Hi folks, I have a conformal coating application where I need the coating to be UV stable for a number of years without any crazing or cracking of the coating. I have looked for such a coating and have come up empty handed. Much of the circuit boar
Electronics Forum | Fri Jan 13 06:54:12 EST 2006 | pjc
Here's a couple more: Vitek Coating Div., Vitek Research Corp. - Derby, CT - Contact Service Company Company Profile: Parylene Conformal Coating Services With Plasma Surface Treatment To Enhance Adhesion. Electrostatic Powder & Liquid Coating Of Med
Electronics Forum | Tue Nov 24 05:23:18 EST 2009 | prodivegsr
Hi Davef, Thanks...Saw 1 of your thread that you posted : Thanks for providing... From davef : There are many possibilities: * Conformal coat is incompatible with surface residue on the board * Conformal coat is incompatible with solder mask on the
