Electronics Forum | Wed Feb 28 20:10:08 EST 2001 | mhunter
Checked the archives with no luck. Anyone have a reliable test method of verifying acrylic conformal coat cure. Using Humiseal 1B31 mixed with approximately 30% solvent, spraying with a Nordson. Thanks in advance.
Electronics Forum | Wed Feb 28 20:16:26 EST 2001 | mhunter
Checked the archives with no luck. Anyone have a reliable test method of verifying acrylic conformal coat cure. Using Humiseal 1B31 mixed with approximately 30% solvent, spraying with a Nordson. Thanks in advance.
Electronics Forum | Wed May 16 11:34:55 EDT 2001 | b123084
I am looking for a conformal coating to protect a PWB that will be completely submerged in water. Unfortunately polyurethane will not work because it will not fill all of the small spaces and leaves voids.
Electronics Forum | Thu Jan 13 11:12:54 EST 2000 | jacqueline coia
Does anyone conformally coat PCBs that have been processed with a no-clean solder paste? Any comments on this subject would be appreciated. Cheers
Electronics Forum | Mon May 10 12:03:27 EDT 1999 | Douglas A. Hooper, Sr.
If I clean my assembly and find no visable contamination with the unaided eye, do I need to do cleanliness testing prior to conformal coating?
Electronics Forum | Tue Apr 27 06:35:33 EDT 1999 | Dan
Using moss fets attached to sub heatsink and hard coat anodizing sub heatsink at higher cost and erratic performance. Looking for thermal tape, insulator to replace hard coat that will prevent shorting.
Electronics Forum | Tue Aug 11 15:13:05 EDT 1998 | Xingsheng
Hi, can you please tell me how to make green coating and through-hole plating of PCB? Thanks! Xingsheng
Electronics Forum | Mon Jul 20 04:19:01 EDT 1998 | Michael Jeremias
Who knows something about the reliability of plasti PEMS and its enhancemant by application of conformal coating (Parylene, metal, SiO2, SiNxOx, etc.) ?
Electronics Forum | Fri May 29 14:01:36 EDT 1998 | Joseph How
Does anyone out there can let me know how to clean a Entek Coating Board if I have a misprint during solder paste printing?
Electronics Forum | Thu May 07 08:31:13 EDT 1998 | Alan Pestell
We are about to use BGAs on our equipment. We clean all products prior to confomally coating them - to keep moisture off the IC legs. Will this be a problem with BGAs. Will we need to get the coating underneath the BGA or will the pitch on the balls
