Electronics Forum | Thu Mar 12 12:18:51 EDT 2009 | diamondmt
If you are looking for someone to coat these assemblies. I would welcome this oppurtunity to quote or even coat one as a first article (free of charge or course). As we are a coating house that uses all types of coatings as well as performing Parylen
Electronics Forum | Thu Aug 27 11:35:07 EDT 2009 | davef
There are many possibilities: * Conformal coat is incompatible with surface residue on the board * Conformal coat is incompatible with solder mask on the board * Moisture is out-gassing from the board * Conformal coat is too thick and does not allow
Electronics Forum | Sat Oct 08 11:57:58 EDT 2016 | davef
A friend in the contract coating business said: "... ask why the wire is [teflon] coated in the first place, as only the solder joints should be coated in this situation as the flexing/bending of the wires will cause the coating to crack and flake of
Electronics Forum | Fri Jan 10 03:40:41 EST 2020 | jakapratama
Hi, Some nano coat supplier said that you can drop water to the surface where the coating supposed to present before to check. If it's beading, it's still there. I take it that you meant by self in-house wiping of coating, yes? Stencil supplier nan
Electronics Forum | Thu Oct 06 10:57:52 EDT 2005 | SuMoTe
Put a known thickness gage next to your boards to be coated. Then coat it in the same pass as your boards. Measure the "new" thickness of your gage and subtract the difference. That will be your coating thickness. This is assuming your coating your o
Electronics Forum | Fri Mar 27 18:19:28 EDT 2009 | blnorman
We use paper labels with a protective coating to prevent browning during reflow. We've had no problems coating over these labels with our silicone. If your coating is not silicone, a Sharpie should print on the coating.
Electronics Forum | Fri Aug 30 07:27:21 EDT 2013 | duso02
Contact the coating manufacturer to get their response. We use many different coatings every day and they all glow differently but that has no affect on the coating itself. As stated earlier, it's job is only as an inspection tool to identify where
Electronics Forum | Sat Feb 12 02:59:39 EST 2000 | Eyal Dickerman
Suplier of Dip coating machines , Technology, Services... Mr Nicebit at ConCoat U.K.
Electronics Forum | Mon Jul 23 16:15:55 EDT 2007 | davef
Josh: Do you measure the thickness of the coupon prior to coating or do you peal the coating and measure that?
Electronics Forum | Thu Nov 21 11:19:58 EST 2013 | davef
Generally, solder connections and leads are conformal coated, unless there is a reason not to coat them.
