Electronics Forum: com (Page 1 of 785)

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Wed Aug 31 09:35:15 EDT 2016 | dekhead

Certainly possible CPU board issue; but check PC power supply, that all DCV are present and strong. www.dekhead.com

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Wed Aug 24 09:20:25 EDT 2016 | dekhead

Suspect comms link error from Y3 to Y1 crate. COM 2 off of CPU, depending on board. If CPU board has RS485 port it is direct to back panel of PC; if older board it only has RS232 and thus requires 232/485 converter board (internal to PC). then direct

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Thu Sep 01 08:30:54 EDT 2016 | bukas

Certainly possible CPU board issue; but check PC > power supply, that all DCV are present and > strong. > > www.dekhead.com > Certainly possible CPU board issue; but check PC > power supply, that all DCV are present and > strong. > > http:/

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Wed Aug 31 07:40:58 EDT 2016 | bukas

BIOS stopped loading, now when I start machine monitor doesn't receive any signal. tried to start machine with different hard drive but nothing

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Wed Aug 31 08:12:37 EDT 2016 | ttheis

Search for the bios or motherboard on ebay. Type in the part numbers you find on the boards and see if anything comes up. Often these are standard pc boards. I've repaired my old MPM by finding the cards on ebay cheap.

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Thu Sep 01 09:08:04 EDT 2016 | dekhead

Yes, wired correctly (5, 12, -12) can easily run on a standard 300W computer PSU.

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Fri Sep 02 04:18:48 EDT 2016 | bukas

i have tested voltages on Processor board X12. all voltages are ok and stabil but +VPP (PT8 - TP9), it reads 0 volts

DEK 265 motor com error, axis 1,2,3 fatal error

Electronics Forum | Wed Aug 24 05:23:45 EDT 2016 | bukas

hello, DEK wont start and im getting this error message: motor com error, axis 1,2,3 fatal error, reinitialise machine. this happens about 30 sec after BIOSes are copied to shadow ram. euro sys cards are inserted properly and on segment display is s

Static dissipative cooling fans

Electronics Forum | Wed Jan 11 16:30:02 EST 2012 | davef

ESD Control Products * desco.com * esdproduct.com * correctproducts.com * esdsystems.com * staticsolutions.com

In need of Maxim IC DS2710G+

Electronics Forum | Fri Nov 16 17:49:07 EST 2012 | davef

Services, Parts, Distributors, Hard to find parts * SolTec Electronics soltecelectronics.com * Cross Components crosscomponents.com * Farnell / Electronic Component Distributors farnell.com * TTI Inc ttiinc.com * SearchlightTech searchlighttech.com *

  1 2 3 4 5 6 7 8 9 10 Next

com searches for Companies, Equipment, Machines, Suppliers & Information