Electronics Forum | Thu Jun 29 00:33:15 EDT 2023 | auriga2001
My background is in I.T. Here's what's likely the cause. It's old and worn out. Not much else to offer technical wise. Hard drives are mostly permanently sealed to keep dust out and have moving parts. Eventually they wear out. The way to prevent fail
Electronics Forum | Fri Jun 23 21:10:29 EDT 2023 | meher
To resolve this issue, you need to ensure that the proper data is stored and transmitted to the MTU. Double-check the communication settings between the machine and the MTU during the startup process. Make sure that all the necessary data is being se
Electronics Forum | Wed Aug 09 15:51:27 EDT 2023 | oxygensmd
Hi! I have just checked in my same oven after a blower-defect. You need Carlo Gavazzi EC3016PPAPL-1 sensor. You can find a link here about the sensor, use it as reference: https://us.rs-online.com/product/carlo-gavazzi-inc-/ec3016ppapl-1/70014680/ It
Electronics Forum | Mon Aug 14 01:29:49 EDT 2023 | calebcsmt
I have noticed on a recent project, the QFN and SOP solder deposits do not seem very uniform and have been leaving little balls, whiskers and icicles of solder paste coming from some pads which leads to bridges. https://imgur.com/a/lqw5RF1 I have u
Electronics Forum | Tue Oct 17 14:34:13 EDT 2023 | unsung
My personal email is a better way to reach out to me I can foward you some information On this. Also it's around 5 power supplies. I haven't played with your version on cp 40. I only work on cp 20, 30 , 45 , 45neo sm341 and Cp60 I'm also on LinkedIn
Electronics Forum | Sun Jul 10 13:24:48 EDT 2011 | sarason
I have finally updated my shareware SMT Machine program It reads Protel ( from Autotrax to Altium Designer) and spits out Yamaha/Philips UFOS, VIOS , Mydata, Fuji MCS2 CP642 CP732, Gencad 1.3, Philips, FCM, ACM, FTIP, Essemtec, Panasonic BM221 CM88,
Electronics Forum | Thu Jan 04 22:40:08 EST 2024 | erikfriesen
Does anyone know what the meaning of the Fixed vision options here https://file.yizimg.com/397047/2014010615545616.pdf showing two checkboxes, one 32mm, the other 17mm? The issue at hand is that fixed camera(upward facing) resolution really to low t
Electronics Forum | Thu Feb 15 13:23:34 EST 2024 | SMTA-64386699
Had a PC issue last year and had to replace it. I went to a local Good Will store and purchased an older desktop with serial ports. Had to purchased the oven software from Heller (around $70). I formatted the PC with Windows XP. When installing the o
Electronics Forum | Mon Feb 19 20:43:57 EST 2024 | erici
Thanks again for the reply. I did what you mentioned on your previous message. When i rebooted the machine i came up with a "software booting" message and didn't go past that. I checked the MC and i got the error "no SRBS, system halted". What is S
Electronics Forum | Fri Apr 05 18:53:52 EDT 2024 | SMTA-64388250
Yes, as many has mentioned before there are many option out there to choose based on your requirements and budget. We are also small company in Seattle for PCBA. Not sure if you have already bought the machine or not but we have upgraded our SMT l
.gif)
