Electronics Forum: comformal (Page 1 of 1)

Acrylic comformal coat on PCB

Electronics Forum | Thu May 02 14:07:53 EDT 2013 | duso02

I would suggest lowering the viscosity even more. Humiseal even sells 1B31 pre-mixed specifically for spray machines and the highest they go is 65cps.

Acrylic comformal coat on PCB

Electronics Forum | Thu May 02 14:26:57 EDT 2013 | wahahasteven

Thanks for the advise, but we want to change the lacquer/thinner ratio at the last step if we don't have other solution.

Acrylic comformal coat on PCB

Electronics Forum | Thu May 02 10:25:14 EDT 2013 | wahahasteven

we have a Specialty coating system (SCS) precisoncoat spray coating system. we are using an acrylic coating material with about 80cp viscosity. The spraying pressure is around 4-6 psi. The main issue is the finish looking of the board. If we apply hi

Inline Comformal Coating Equipment

Electronics Forum | Wed Jul 01 07:11:55 EDT 1998 | Wayne Bracy

Seeking information on companies that manufacture conformal coating equipment. Pro's and Con's of UV / IR or air cured coatings. Masking verses selected coating systems. Thanks Wayne

Re: Inline Comformal Coating Equipment

Electronics Forum | Wed Jul 22 15:35:44 EDT 1998 | Katy H

Check out Precision Valve & Automation Latham, NY Phone: 518-782-3436 They make a relatively inexpensive system for applying material. You can choose spray or valve dispensing or both. The product is built simply and has been relatively easy to set

Re: Inline Comformal Coating Equipment

Electronics Forum | Thu Jul 02 02:47:10 EDT 1998 | Graham Naisbitt

Wayne, We make such equipment both as batch and in-line systems, IR, UV curing as required. We have over 1000 systems installed worldwide. Are ISO9002 qualified. If you can let me have your address, I will get you more info. Maybe you could elaborate

Re: Inline Comformal Coating Equipment

Electronics Forum | Tue Jul 07 14:17:38 EDT 1998 | ETS, Inc

Dear Wayne, ETS is a manufacturer of conveyorized curing ovens for use with conformal coatings. We also happen to be the manufacuturer of the Nordson Ovens which are often integrated into the Select Coat and Century conformal coat lines. I would be h

Comformal Coating Stripper

Electronics Forum | Thu Feb 28 21:01:09 EST 2008 | davef

Tony: Thanks posting information about your experience with strippers. First, why did you need to strip the entire board? Next, please clarify the following points to expand our knowledge of using Humiseal 1063 Stripper: * How long was the conforma

Comformal Coating Stripper

Electronics Forum | Wed Feb 27 13:11:04 EST 2008 | tonyamenson

I was asked to post my finding about HumiSeal stripper for polyurethane coating. Both as an information sharing as well as someone who may offer advice on teh situational use of 1063 solvent stripper. So here is what I found: The stripper worked t

Comformal Coating Stripper

Electronics Forum | Mon Mar 03 17:42:35 EST 2008 | tonyamenson

I stripped the entire board because I had to have the boards troubleshot. Had a high failure rate from the field. The board coating was applied about 5 months ago. I was told by my people anything past 3 days and you will need this type of stripper

  1  

comformal searches for Companies, Equipment, Machines, Suppliers & Information

Online IPC Training & Certification

World's Best Reflow Oven Customizable for Unique Applications
Industry 4.0 Reflow Oven

PCB Assembly Supplies - ONLINE STORE
Jet Printing and Cleaning Challenges

MSD Dry Cabinets
Contact Systems equipment training

SMT Machines, Parts & Accessories - Used and New