Electronics Forum | Thu Apr 26 01:42:56 EDT 2007 | Haris
Hi, yes may be 3d is slow but it gives you great results as it shows the height while 2d picture shows error when the paste in your machine appears to end i.e. when it see that the pad starts to appear. I don't know which company brand you prefer but
Electronics Forum | Tue May 22 03:11:40 EDT 2007 | Frank
We also keep our pot just below the liquidous state over night. It takes a lot less time to get it to temp than a cold pot and we aren't creating dross over night. If you have been shutting down over night for some time, then you can get an average
Electronics Forum | Sat May 26 00:32:55 EDT 2007 | crashoveride
it'll be cheaper if you'll let your wave machine up all night and let it in its idle temp (supposed to be 200��C) simply because it will need less power from idle temp up to operational temp compared to from 0�C-operational temp. Temperature Sensors
Electronics Forum | Thu May 31 09:13:10 EDT 2007 | gsala
Tnks Davef, be patient pls, what does it exactely mean? That one of the two, in case of cleaning needs the flux residues are more difficult to remove for one of the two fluxes ? i.e. NC wire fluxed by ROL0 compared to fluxed REL0, in terms of so
Electronics Forum | Thu May 31 09:43:24 EDT 2007 | patrickbruneel
In addition to Dave�s response: RO fluxes are based on natural pine (tree) rosin. RE fluxes are based on synthetic or modified rosins called resin. Below a couple of advantages resin can have compared to rosin: � Better thermal stability. � Resin
Electronics Forum | Thu May 31 16:30:45 EDT 2007 | gsala
Thank Patrick for your infos. Seen that youa are an expett, when you'll have time, pls, tell me some thing about ORL0 (always in wire for L-F manual solder) compared to ROL0 and REL0 earlier already explained me. Rgrds....GSx PS:my target is to le
Electronics Forum | Mon Jun 25 11:31:40 EDT 2007 | realchunks
I have to disagree with you SWAG. Unless you thread it, it doesn't meet fire code. If you got connections that operators plug into, copper bends easy compared to other pipe. PVC is only allowed for compressed air if it is used underground (at leas
Electronics Forum | Wed Aug 01 11:51:05 EDT 2007 | patrickbruneel
With the rising cost of lead-free, reliability and many other issues I�m sure �it� will get some serious reviews by OEM�s. Comparing this technology with leaded soldering I agree with you Chunks. But it sure does make a whole lot more sense than lea
Electronics Forum | Wed Sep 19 12:19:36 EDT 2007 | miguerre
Hi, We are lookin for somebody that would be able to repair a Sikama reflow soldering system model Falcon 3. The unit does not heat up, and the track stopped working as well. The machine is from year 1987 and the serial# 87-06-030 Also, if you hav
Electronics Forum | Mon Oct 08 09:48:22 EDT 2007 | slthomas
I used to just follow up profile development with a single pass with a MOLE, one thermocouple in air. I'd keep that profile as a baseline, and have the operators run the MOLE through prior to production and compare the results to the baseline. I foun
