Electronics Forum | Wed Dec 26 16:52:57 EST 2012 | davef
"Advantages of Bismuth-based Alloys for Low Temperature Pb-Free Soldering and Rework" Author: Brook Sandy, Edward Briggs and Ronald Lasky, Ph.D. Abstract: The increased function of personal electronic devices, such as mobile phones and personal mus
Electronics Forum | Sat Sep 14 23:45:44 EDT 2013 | jandon
How many operator/technician/engineer do you recommend for following SMT assembly line to achieve good uptime and smoothly running quality inspection, NPI process, tehcnical support and maintenance at the same time: - Single shift, 8 hours/day - Pri
Electronics Forum | Tue Mar 04 17:17:29 EST 2014 | catsem23
Hi I'm trying to pick and place a lot of sod523 components with a mydata my12. I'm using C14 standard tool and Hydra tool H01. For some reason no matter what I try to do when the head picks the component with the C14 tool the machine emergency stops
Electronics Forum | Thu Apr 17 11:59:59 EDT 2014 | briantmc
Hi all. A "newbie" on the forum, hopefully someone can help! I have a Quad IVc that has developed a problem on its Theta Axis. In performing the Homing routine it does not spin the nozzle through 360 deg as it should. It does a small turn ~45deg o
Electronics Forum | Wed Oct 01 14:56:56 EDT 2014 | tim_wilkinson
Fuji_user_2014, I work in sales at Manncorp and we have a two styles of dry boxes you may want to consider. We have dry desiccant boxes that will store your components at less than 5% RH. We also have dry baking boxes that will store your componen
Electronics Forum | Fri Nov 21 13:37:36 EST 2014 | gregp
If there are parts "non-identifiable" then you don't know their cost. Parts under a certain cost you don't worry about. That leaves only category "A" parts to concern yourself with. Know your attrition rates especially for parts over a certain cos
Electronics Forum | Wed May 27 13:50:38 EDT 2015 | ingallsd
I saw a question regarding the acceptability of stacking chip components at this forum posted in 2000. Unfortunately no one could cite any applicable IPC sections at that time. I am now able to find that this is acceptable per IPC-A-610D, Section 8.
Electronics Forum | Wed Sep 30 08:29:15 EDT 2015 | johanbergstrom
The difference between TMC Flex and TMD Flex is about the ability to feed component tape with deep pockets for larger components. The TMC have a rather low passage for embossed component tape. While TMC Flex is limited to a maximum tape depth of 7,5
Electronics Forum | Wed May 25 22:32:28 EDT 2016 | stevedc
So, I haven't used my Quad 4C for a while and when I started everything back up to run a new board it appears that the Quad align is in need of calibration. When I pick up a component and do an LAE measurement on it it shows the part center location
Electronics Forum | Mon May 14 04:00:15 EDT 2018 | sarah2018
Before you buy glue dispensing machine, you need tell the supplier two question as below: Two questions before purchase 1.What’s type of glue do you use ? What’s the base characteristic ? A)One-component or two-component (A&B glue); B)What is the A