Electronics Forum | Sat Dec 16 10:07:04 EST 2000 | Dave F
If I were you, I�d be concerned about waving your SO18 too. What is a SO18? Who makes that package? Regardless, it should be a can of corn, if you: * Orient it so that leads on opposite sides of the component see the wave at the same time. * Incre
Electronics Forum | Fri Dec 15 08:44:17 EST 2000 | DaveJ
I need some advise from the reflow experts. In your experience in nitrogen versus air reflow, what would be the differences in profile parameters? For example, if I profiled a board in nitrogen and achieved (for a particular component) ramps rates un
Electronics Forum | Fri Dec 15 11:21:45 EST 2000 | ralph
In my experiance, I have seen no difference in profiles between nitrogen and air reflows. What I understand is that the Nitrogen blanket allows for a greater solderability to gold plated pads. I also found that when dealing with fine pitch componen
Electronics Forum | Fri Dec 15 05:02:42 EST 2000 | SaiWong
It is not gonna work. Even though you fine tuned the CP3. 0603 is the maximum. The camera design is only for the 0603 maximum. If you use it for 0402. I think at least 60% of the component are gone. Also, there is no 0802 feeder for the CP3. How can
Electronics Forum | Sun Dec 03 10:05:22 EST 2000 | Steven J
Greetings to all. We are currently experiencing cracking of the ceramic capacitors, on both primary and secondary sides of the PWB. The components range in size from 1206, 1210, to 1815s. The cracks do not appear to alter the electrical properties
Electronics Forum | Fri Dec 01 00:30:59 EST 2000 | arminski
I have a proto-type PCB with a 48-Pin Fine Pitch TSOP (0.5mm pitch) with a dimension of 19mm L x 11.50mm W x 1.10 Thickness. They are at the bottomside of the PCB and I need to wave solder the board. There are 8 of them at the bottom side. Are they o
Electronics Forum | Thu Nov 30 11:38:44 EST 2000 | Reno Cassar
I am electronic hobbyist, which has made a prototype for electronic lock. On showing this to a company they become greatly interested. All the Smt for the prototype were placed manually on the prototype. I would like to set up a line without any huma
Electronics Forum | Thu Nov 30 14:32:07 EST 2000 | Claude_Couture
Production of 50000, is this per year, per month, per week, what? As for your budget of 80000 Euro, that is no much to go on. For a basic SMT line, you need at least 1 paste printer, 1 placement machine and 1 reflow oven. If you have any through-hole
Electronics Forum | Thu Nov 30 11:37:38 EST 2000 | Reno Cassar
I am electronic hobbyist, which has made a prototype for electronic lock. On showing this to a company they become greatly interested. All the Smt for the prototype were placed manually on the prototype. I would like to set up a line without any huma
Electronics Forum | Mon Nov 27 13:23:57 EST 2000 | Highplanes Drifter
Hi Folks! First time poster to this forum. I would like to construct a small and inexpensive radio transmitter, which I can attach to some external port on my TV receiver, and which will transmit the sound component of the current audio/video displa