Electronics Forum | Thu Jun 04 02:58:48 EDT 2015 | oxygensmd
I saw the same problem before we changed to S20. S15 has a problem with the components. They can fall into the head easy. Try to remove the head, clean the inner encoder and check there isn't any small component. If you work with 0402 or same/smalle
Electronics Forum | Thu Jun 04 07:54:53 EDT 2015 | frix
Good day, Thank you very much for the response. We are currently running 0603 and larger. I don't think there is any components that got into the head. I've been reluctant to open up the glass encoder of the head - it seems that a lot of the parts
Electronics Forum | Tue Mar 25 08:13:10 EDT 2008 | davef
Turns out, SMTnet didn't want us to use the name of the town where the publisher of Reference 1 is located.
Electronics Forum | Tue Mar 25 07:33:46 EDT 2008 | davef
References [Analog Devices] 1) "Surface Preparation and Microscopy of Materials" B Bousfield, John Wiley & Sons, LTD., West Susse_, England, 1992 2) "Metallography Principles and Procedures" Leco, Corp. 1992 3) "Buehler Dialog, Microstructural Analys
Electronics Forum | Mon Mar 24 22:53:22 EDT 2008 | davef
As you say, just about defect can be tied to process, one way or another. If you want to think about it, search the fine SMTnet Archives for background on barrel cracking. Other things are: * How thick is the actual via plating from the two supplier
Electronics Forum | Mon May 06 14:55:58 EDT 2013 | dyoungquist
We had that problem on our M12. There were a few components that had gotten dropped into the camera area as the hydra head past over it. Our MY12 has a knob towards the front of the machine in direct line with the camera. Pulling this knob release
Electronics Forum | Mon Jun 15 17:54:38 EDT 2015 | catsem23
Hi I have been having a problem with my Hydra tool reference plate. Machine keeps stopping and comes up with error message - failed to locate hydra tool reference marks & Error mounting component .... from feeder ..... with nozzle .... I have check
Electronics Forum | Mon May 06 19:21:39 EDT 2013 | amelby
We had that problem on our M12. There were a few > components that had gotten dropped into the > camera area as the hydra head past over it. Our > MY12 has a knob towards the front of the machine > in direct line with the camera. Pulling this
Electronics Forum | Thu Oct 16 07:38:35 EDT 2008 | rway
There are seconds when it comes to components. Find out what her sources are and if she is purchasing from a reputable vendor. She may be doing what all purchasing agents do, and that is finding the best deal out there. Especially if her review de
Electronics Forum | Tue Jan 13 10:53:05 EST 1998 | Tonya Warner
It is also my job to ID and cross components. I have found that the same number can be used by different manufacturers for different parts, same package style. There is not a standard marking system for SMT devices so watch out for this.
