Electronics Forum: component space (Page 1 of 38)

Re: Minimum space recommended for thru-hole, pad to pad

Electronics Forum | Wed Jun 23 18:23:32 EDT 1999 | Tom B.

Even though you may find a pad-pad thru-hole spacing, part body size, orientation, and insertion head tooling clearences may be the deciding factor in spacing. 1. Part body diameter will dictate component centroid spacing. ---[][][][

Re: 0603 component drift

Electronics Forum | Thu Nov 11 19:23:33 EST 1999 | Dave F

Gary: Sounds like the spacing between each pad for the component are too far apart. My 2�. Dave F

Wave soldering SMT component spacing

Electronics Forum | Wed Aug 28 19:35:13 EDT 2002 | ppwlee

Hi, Does anyone have guidelines on minimum SMT component spacing for bottom sided wave soldering? I am looking for general rule of thumb in wave soldering bottom side SOTs, 0805 & 0603s. How about minimum through-hole lead to pad distance? Peter

Wave soldering SMT component spacing

Electronics Forum | Wed Aug 28 19:36:29 EDT 2002 | ppwlee

Hi, Does anyone have guidelines on minimum SMT component spacing for bottom sided wave soldering? I am looking for general rule of thumb in wave soldering bottom side SOTs, 0805 & 0603s. How about minimum through-hole lead to pad distance? Peter

Wave soldering SMT component spacing

Electronics Forum | Thu Sep 12 18:54:21 EDT 2002 | scottefiske

PTH to SMT spacing should be 80-100 thous. any closer will result in bridging. Scott

Wave soldering SMT component spacing

Electronics Forum | Fri Aug 30 16:47:56 EDT 2002 | davef

Ooops, sorry Peter. [Those pesky decimal points.] I meant to say �150-200 thou�. There is a fair amount of 'Kentucky Windage' in this due to: * Height of the component and the down-stream spacing. * Chip wave capabilities.

component reels storage

Electronics Forum | Tue Mar 01 14:47:48 EST 2005 | cabjerk

Hi: We started many years ago with totes on shelves 30 reels per side. Then we moved to 12" shelving with reel boxes. 5 reels per box. It was cheap and each was a single location. Great for finding and decrease cycle time in finding parts. Our wh

Wave soldering SMT component spacing

Electronics Forum | Thu Aug 29 20:34:02 EDT 2002 | ppwlee

A gap of 150-200� between potential shadow components is enough to eliminate those problems. Dave, Can you clarify? Do you mean 0.015 to 0.02?? Peter

Wave soldering SMT component spacing

Electronics Forum | Thu Aug 29 20:01:23 EDT 2002 | davef

Many people use the same spacing [and pad designs] as they use for primary side SMT. We don�t. DOWN STREAM SMT-TO-SMT SPACING: In addition to proper orientation, components cannot be immediately upstream of terminations that are to be soldered or b

Clearance between Through hole and chip component

Electronics Forum | Tue Feb 27 20:53:10 EST 2007 | davef

We'll guarantee the two pads are too close together. The proper spacing depends on the orientation of the parts to the wave. * Do the pads hit the wave at the same time? * Does one pad hit the wave before the other? If so, which? * How does the 06

  1 2 3 4 5 6 7 8 9 10 Next

component space searches for Companies, Equipment, Machines, Suppliers & Information

Void Free Reflow Soldering

Easily dispense fine pitch components with ±25µm positioning accuracy.
Hot selling SMT spare parts and professional SMT machine solutions

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
2024 Eptac IPC Certification Training Schedule

Software for SMT placement & AOI - Free Download.
SMT feeders

Best Reflow Oven