Electronics Forum | Mon Feb 21 13:57:37 EST 2005 | JB
Start by verifying the component definition, the thickness is critical. HSP 4796 uses nozzle 81 for 0402's. Make sure is using the right nozzle. If you need to, use the autoteach function to physically teach the dimensions of it, thickness included.
Electronics Forum | Thu Jun 30 13:46:00 EDT 2022 | linux
Hello All, I'm looking for information on panasonic standalone component verification software. Can someone get us a brief outline on how the wireless scanning communicates with the ILNB to verify that the correct reels are loaded to the mounter, Tha
Electronics Forum | Tue Jan 09 22:33:45 EST 2007 | Guest
Dear AJ, Try removing shield ,test it, verify if it would perform as the previous runs . If not, there maybe something wrong with device or as one of our collegue mentioned that there is possibilty the your customer change some components.If the
Electronics Forum | Mon Jan 06 17:42:36 EST 2003 | gregp
That is true. But maybe for discreets in paper tape where the bulk of your partially used reels is it may be helpful. The rest you can guestimate. Not very good of course. As a placement machine manufacturer I agree every machine should have real
Electronics Forum | Mon Oct 28 07:07:39 EST 2002 | cyber_wolf
It has been my experience that when all conditions are as they are supposed to be there should be zero or very little deflection. When you start placing components with pick and place equipment that does not have a Z pressure sense, you run the possi
Electronics Forum | Wed Oct 30 01:23:22 EST 2002 | jasper
It has been my experience that when all > conditions are as they are supposed to be there > should be zero or very little deflection. When > you start placing components with pick and place > equipment that does not have a Z pressure sense, > yo
Electronics Forum | Sat Mar 24 12:31:31 EDT 2007 | diesel_1t
Hi there. Ok, i have a little big question for fuji Erudites: when machine run out of parts on any device it tells to machine "parts out (and part number)" So, a signal from anywhere (maybe a PLC output) will tell to the machine "hey i'm out of parts
Electronics Forum | Thu Nov 30 13:36:27 EST 2006 | realchunks
I think you answered your own question. Try a different lot or mfger of this part. You can prolly get a sample sent over nite and hand place them to verify. Trying to find out why these resistors "explode" when touched with a needle is like findin
Electronics Forum | Wed Apr 04 20:22:35 EDT 2007 | diesel_1t
Totally agree on what you said, but there's some other things involved: There's not enough training, here in Juarez, Mexico, the level of pesonal turnover is very high so when you train on certain procedure, they leave for some reason and always is
Electronics Forum | Thu Aug 22 23:30:12 EDT 2019 | jandon
Check from the component distributor/manufacturer if they can verify that the component is genuine or counterfeit component. I know a similar case and the manufacturer could not verify the component as a genuine. They could not find the batch number
