Electronics Forum | Thu Jun 07 16:12:36 EDT 2001 | csullivan
Does anyone know of a good masking material for conformal coating? The coating is silicon based. Any help would be greatly appreciated. Thanks
Electronics Forum | Thu Jun 05 05:27:13 EDT 2008 | andy1975
Hi, I've been looking into UV cureable conformal coating and the UV ovens but a chemist I know is very negative about this. He suggest by heating standard conformal coating to 90deg for a couple of minutes will make the product good enough to handle
Electronics Forum | Tue Mar 04 10:42:45 EST 2008 | operator
We have a product that requires labeling and serial numbers that obviousely should be put on prior to conformal coating. 1.What kind of labels/ink/sharpe can be used under conformal coating without disolving etc...? We will be using Techspray 2103-1
Electronics Forum | Thu Jul 25 10:52:26 EDT 2002 | waynesmith
I've been tasked with increasing the CCA throughput in our Conformal Coating workcenter. My first approach will be to look into a more *automated* approach for the masking process. We currently use a manual method of using masking tape prior to con
Electronics Forum | Mon Nov 03 11:13:44 EST 2003 | ADAM
Guys When stripping conformal coating from an entire assembly, how do I know the stripping solution won't damage anything on the PCB ? stuff like electronic sensitive devices, wiring, labelling and plastic hinges. And secondly when conformally coati
Electronics Forum | Tue Jan 24 10:24:18 EST 2006 | kmorris
We've got a problem here, where we're hand spraying a urethane conformal coat on over a rectangular inductor. The inductor body is a plastic tube, with potting to fill. The top is not always flat (sometimes concave). The problem is that bubbles appea
Electronics Forum | Tue Mar 19 13:02:49 EDT 2013 | caurbach
We've used masking tape and peelable (pink) mask to mask our boards before conformal coating for a long, long time. This is a huge time sink, and increases our lead times (particularly because of the cure time for the pink mask). What are other com
Electronics Forum | Mon Apr 17 14:43:35 EDT 2017 | davef
Measurement of Conformal Coating thickness on Printed Circuit Boards [ http://www.defelsko.com/applications/conformal-coating/printed-circuit-boards.htm ] I receive no benefit from the supplier mentioned above. IPC-HDBK-830A, 8.11.1 talks to measu
Electronics Forum | Fri Jan 14 17:09:21 EST 2005 | Bob R.
Whether or not conformal coating creates a reliability problem if it bridges the gap between the board and bottom of the part depends on the properties of the coating. A low modulus coating is fine, but one thats modulus increases at colder temperat
Electronics Forum | Thu May 17 15:17:42 EDT 2001 | blnorman
Parylene is arguable the best conformal coating there is, unfortunately it's also the most expensive. We had considered using it some time back, but due to environmental and safety issues, we would have had to build a new building to house the proce
Lewis and Clark is your #1 Pre-Owned Surface Mount and In-Circuit Test equipment supplier. We offer a variety of equipment solutions at a significant cost savings over new.
Manufacturer / Equipment Dealer / Broker / Auctions
18 Celina Ave., Unit 16
Nashua, NH USA
Phone: (603) 594-4229