Electronics Forum: conformal and coating and ce (Page 1 of 5)

Solder Balls and conformal coating

Electronics Forum | Fri Apr 05 15:24:14 EDT 2019 | sever_83

What can cause solder balls to appear after conformal coating? Using Dymax 9-20557, light curing for 1.5 mins. Can too much heat from light cure cause solder balls?

Mixing conformal coating and RTV

Electronics Forum | Thu Apr 21 12:35:15 EDT 2005 | jdumont

Well that doesnt sound very promising. What im going to do is make sure these two boards I just coated (with the RTV already cured) will be used in house only. In the future we will do any conformal coating operations before potting with whatever mat

Solder Balls and conformal coating

Electronics Forum | Fri Apr 05 16:31:55 EDT 2019 | slthomas

Never heard of such a thing. Are you sure the coating isn't just making the solder balls more prominent? Where are the "new" solder balls appearing after coating?

Mixing conformal coating and RTV

Electronics Forum | Thu Apr 21 17:22:29 EDT 2005 | davef

We prefer epoxy.

Mixing conformal coating and RTV

Electronics Forum | Thu Apr 21 10:44:35 EDT 2005 | jdumont

Morning all. So today I have been tasked with conformally coating a few of our first run PCBs for a new product line. The problem is that they have already had all the larger caps potted with RTV. Are there any problems with spraying the CC over the

Mixing conformal coating and RTV

Electronics Forum | Thu Apr 28 11:14:27 EDT 2005 | bbarr

If you apply the RTV after coating, what happens to bond strength since you are now bonding to the coating and not the board? Will the caps still survive vibration and shock? I specify applying RTV before coating for this reason. Am I correct? I als

Mixing conformal coating and RTV

Electronics Forum | Thu Apr 21 11:43:03 EDT 2005 | davef

We understand the problem of trying to coat over RTV. We have seen the same problem with acrylic and urethane coatings not wanting to stick to RTV. Some acrylics seem to be worse than urethane. Since this is a new product, may be you could pot your

Solder Balls and conformal coating

Electronics Forum | Mon Apr 08 14:16:29 EDT 2019 | sever_83

We've never heard of seen of such a thing either. We tried a clean sample board and applied con coat. Same process through out and we saw nothing. After speaking with the original operators who was curing the boards he had left the boards much longer

Mixing conformal coating and RTV

Electronics Forum | Fri Apr 22 10:12:14 EDT 2005 | davef

Common RTV does out-gas causing corrosion. NASA allows use of non/low-out-gassing RTV. Try the following companies: * Ablestik Electronic: Materials, 20021 Susana Road, Rancho Dominguez, California 90221 U.S.A., 310-764.4600, F 310-764-2545 * Arlon

conformal coatings and flux compatability

Electronics Forum | Tue May 23 12:18:25 EDT 2000 | mike weekes

Which companies would you consider for protective coatings, (conformal coating) and other levels of protection? I am taking a fresh look at alternatives. Know any good tests for testing compatability of coating with flux - aqueous or no clean? SMT

  1 2 3 4 5 Next

conformal and coating and ce searches for Companies, Equipment, Machines, Suppliers & Information

Capital Equipment Exchange
Capital Equipment Exchange

CEE consists of pcb mfg industry professionals with over 20 combined years of sales experience. Our core purpose is to buy/sell pcb mfg and test equipment. We understand the path of making winning solutions based on clearly commun

Equipment Dealer / Broker

2802 Barney Court
McHenry, IL USA

Phone: 815-363-0800

Your 2021 Eptac IPC Training Schedule

PCB Assembly Supplies - ONLINE STORE
Voidless Reflow Soldering

Benchtop Fluid Dispenser


Orange Sticks, Wiring Aids & Probes for Soldering & Desoldering.
High Throughput Reflow Oven

High Throughput Reflow Oven


Orion Hungary - variety of EMS for clients preferring quality and on-time delivery