Electronics Forum: conformal coat thickness gauge (Page 1 of 10)

Bubbles in conformal coat

Electronics Forum | Thu Aug 27 11:35:07 EDT 2009 | davef

There are many possibilities: * Conformal coat is incompatible with surface residue on the board * Conformal coat is incompatible with solder mask on the board * Moisture is out-gassing from the board * Conformal coat is too thick and does not allow

Bubbles in conformal coat

Electronics Forum | Thu Aug 27 08:34:50 EDT 2009 | floydf

I am having trouble with little air bubbles in my conformal coat. It ranges from a few pin sized bubble to looking like spit. We are using Dow 2620 silicone conformal coat applied with a PVA sprayer machine. The conformal coat comes in bladder bags t

Masking of PWBs prior to conformal coat

Electronics Forum | Fri Apr 21 17:46:29 EDT 2006 | SD

First of all, do not use kapton tape! It tends to cause a dewetting effect around the tape. A call to Humiseal will explain why. There's not really a blanket answer to your question.... Removing cured liquid mask can often result in a fillet ef

Conformal coat material dispensed through epoxy needle?

Electronics Forum | Fri Feb 03 15:32:28 EST 2017 | westshoredesign

Not sure exactly what kind of coverage your looking to get but we use Dow Corning 3-1944, it's room-temp cure and rather thick, (think warm honey). But we have found it useful on several projects. http://www.dowcorning.com/applications/search/produc

Problem with conformal coating

Electronics Forum | Thu Nov 23 06:05:24 EST 2006 | 1B73

The solid content of 1B73 is too low, especiall when you add large amount of thinner, not easy to get enough coating thickness.

PCB conformal coating

Electronics Forum | Thu Jul 03 17:29:42 EDT 2008 | mikesewell

Re: item 3 - there are ultrasonic thickness machines (Panametrics makes one) that can measure coating dry with a small transducer head. A little pricey for ones that measure reliably in the .003" +/- .002" range.

PCB conformal coating

Electronics Forum | Wed Jul 02 02:46:44 EDT 2008 | tang

Hi Guys, I have few question would like to ask regarding pcb conformal coating: 1. Can I know which masking material is the best for easy apply, fast cure, fast & easy to remove after coating & baking. And no chemical reaction which will whiten the

UV cure conformal coating

Electronics Forum | Thu Mar 31 10:14:06 EST 2005 | davef

There's some nice low-VOC uV coatings out there. We don�t use uV cured coatings, but try: * http://www.emersoncuming.com * http://www.dymax.com * http://www.mgchemicals.com * http://www.loctite.com * http://www.humiseal.com Be aware that uV co

Inspect workmanship through conformal coating

Electronics Forum | Mon Sep 05 16:24:09 EDT 2016 | davef

inspect => conformal coat ... and standards are aligned with that philosophy. I can imagine doing a good job inspecting assembly after being coated with particular coating thickness, optical properties, lighting conditions. Ultra-thins are so thin

1B31 Acrylic conformal coating problems

Electronics Forum | Mon Jan 03 00:30:30 EST 2011 | raghu

Contact your distributor for the coating or > Humiseal directly. Humiseal has had a recent > issue with batches of 1B31. The specific problem > is lack of adhesion, which is what you have as > well. You need to find out if your batch # is one >

  1 2 3 4 5 6 7 8 9 10 Next

conformal coat thickness gauge searches for Companies, Equipment, Machines, Suppliers & Information