Electronics Forum | Mon Feb 22 10:19:57 EST 2010 | swag
Check/reseat all connections on axis driver card and from driver card to step motor. On older MpM's it is common to get a bad connection on the connector for axis driver power and blow components on your driver board. Reseating these connectors mig
Electronics Forum | Wed Sep 29 11:25:49 EDT 2010 | mazjal7
Hi, We are placing a Surface Mount connector on a flex circuit, we are planing on using SMT carriers to support the flex through the SMT process. Underneath the connector a stiffener needs to be adhere, I'm not sure if we should have the flex manu
Electronics Forum | Fri Aug 12 10:41:04 EDT 2011 | eezday
I believe you've gotten some wise advice about finding a working board rather than attempting repair. If you decide to attempt the repair, checking or replacing the regulators is a reasonable starting point (primary power). The next thing I would d
Electronics Forum | Tue Nov 01 09:16:03 EDT 2011 | austinpeterman
Hello, Looking for a solution to silicon conformal coating wicking up into connectors. We build IPC-A-610 class 2. We are using a PVA 650 with Dow Corning 1-2577 conformal coating. We have solder joints that must be coated 1.25mm from the connecto
Electronics Forum | Wed Jan 18 06:22:23 EST 2012 | ngineer
I rang out the bases, the connectors are common (i.e from top to bottom, 1-1, 2-2, 3-3,4-4). I also measured voltage on the connectors. Front and back don't have any voltage, and the lights don't come on when I press the buttons. Left and Right ar
Electronics Forum | Thu Feb 21 08:20:43 EST 2013 | cowens
Thank you so much. We actually did get the machine up and running yesterday morning. We switched the theta and the transport driver cards and it is working now. We have had the connectors burn on us in the past and replaced them. I am hoping the prob
Electronics Forum | Thu Jun 12 17:52:37 EDT 2014 | jorge_quijano
Update 6/12 After solder preform (SAC303 0603) I did not get good result... Couple of connectors have a guide pin that does not allow enough space for preform :( I will try with aperture size modification for my next run. What about step up stenci
Electronics Forum | Thu Aug 21 10:14:57 EDT 2014 | malard
I know my Sanyo machine is no longer made, and the Sanyo connector has died out, but I have an ASYS TRM-03 conveyor that I want to connect up to it, in the manual it references Sanyo for its output format by adjusting a couple of jumpers. However the
Electronics Forum | Wed Mar 18 09:52:40 EDT 2015 | rgduval
You'll want to double check the electronics in the magazines, as well as the mechanicals. Over time, the connectors can come loose, and could affect performance. I'm thinking of the "dead" feeder that you mentioned, while the rest of the feeders wo
Electronics Forum | Fri Jul 24 14:50:43 EDT 2015 | woodsmt
If you are buying this tooling, you need to ask yourself if you really need the OEM tooling. While it is definately required for come delicate and complex connectors, for a machine like the 6T, 95% of the time you can get away with a metal block. y
