Electronics Forum | Tue Dec 10 19:30:49 EST 2002 | Vijay
Hi Dave, The peak temp on the leads is 216-218 Deg C and duration above MP (179 degC) is 55-60 sec. Alloy(solder paste) used 62 Sn,36 Pb 2Ag (Alpha WS 609 Ty 3 Water eash) This is a SMT connector wth Gulwing leads Gold plating on the PCB is 2-5 micr
Electronics Forum | Fri Feb 28 13:09:49 EST 2003 | russ
Check out out hot bar equipment, we used to do this with very good results. I am sorry that I can't remember the manufacturer to help you check into this. If you are not familiar with this here is the process in a nutshell, place assy and connector
Electronics Forum | Mon Apr 21 06:26:28 EDT 2003 | Grant
Hi, We have a SMT production like, however we have very little experience with through hole assembly. We design everything to be completly SMT based, however connectors are the only part of our product that still requires through hole assembly. Cur
Electronics Forum | Wed Jan 28 01:27:30 EST 2004 | Martin Silberkuhl
First of all, sorry for my bad english (I'm german)!!! We have the following problem: we assemble 6pcs. smd 30pin connectors on one of our boards that we produce. These connectors have a top cover, that the pick&place machine can put it on the board
Electronics Forum | Sat Apr 03 05:22:46 EST 2004 | wsanita
Customer returned a board and a 50 pin connector with .020" pitch that "fell off". after looking under a scope i can see the plating of the connector embedded in the solder. To me it looks like it broke off. Designer did not put the anchor pads on th
Electronics Forum | Mon Mar 07 09:44:49 EST 2005 | anonomous
The machine sees a magazine, but with wrong number. somehow one (maybe more) wire from the magazine bus does not reach slot 3, as the other slots work, there is probably not a short, as the magazine bus work for other slots, the problem is probably i
Electronics Forum | Wed Apr 06 11:58:02 EDT 2005 | patrickbruneel
Hi SMT Engr With a double-header connector do you mean Double Level Right Angled Header Connector. If so there is a big difference in heat sinking capacity between the two rows, as where the pins of the top connector absorbes twice as much heat as t
Electronics Forum | Wed Apr 06 22:59:02 EDT 2005 | smt_rookie
It is the solder ball that's usually encountered in a reflow process. It's just that, the paste did not wet well along the connector pins. Before reflow, the paste is actually at the tip of the connector, and stayed there and never went up to fill th
Electronics Forum | Thu Dec 22 16:12:51 EST 2005 | chunks
Off the Cuff Answer: Wow, nice big ugly connector! Thought we were the only ones using these things designed during the Korean war. Actually it really depends on the customers print. If they want conformal coating, they should know exactly where
Electronics Forum | Mon Dec 04 14:21:49 EST 2006 | jdengler
Todd, It's been a while since I have looked at this but I believe the IP-1 does not have a relay board for the feeders. +24 Vdc is wired to a pin on the connector and the I/O board (NO 3 I think) switches the ground. If you don't have +24 Vdc at 1