Electronics Forum | Wed Sep 01 09:12:04 EDT 2004 | Chen
Hi Shean, Thanks for your advise. But what kind of chemical i needs to add inside to the washing machine when cleaning. Regards, Chen
Electronics Forum | Thu Sep 02 13:58:57 EDT 2004 | Chen
Hi Shean, Thanks for your advise but now currently we trying using the new chemical to remove the residue which recommanded by our supplier, so hopefully can be success. Thanks. Regards, Chen
Electronics Forum | Fri Sep 17 08:31:01 EDT 2004 | patrickbruneel
Adam, If you use the chipwave on that board, eliminate the chipwave on one board and see if this eliminates the problem with the insufficient solder on the connector. Regards, Patrick
Electronics Forum | Wed Sep 22 22:30:50 EDT 2004 | davef
We are aware of no such standard. You need to determine the acceptable level for your product in its use environment.
Electronics Forum | Fri Oct 15 18:09:49 EDT 2004 | teamcanada
No lead devices oxidize very quickly when washed. Try to keep it a no clean process. Solderability comes into play a bit depending on solder paste.
Electronics Forum | Sat Oct 16 09:03:48 EDT 2004 | davef
Here is a thread from the fine SMTnet Archives from a couple of weeks ago, where we spoke about the topic of mixed lead-free solder with components that have lead-bearing solderability protection: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Messag
Electronics Forum | Thu Feb 03 14:34:30 EST 2005 | jdengler
I had 1 of the feeder connectors on the MFU develope a short which blew 3 IC's before I found it. Good Luck Jerry
Electronics Forum | Fri Mar 11 14:30:03 EST 2005 | ???
i agree with changing the head board if the ribbon cables have been changed. I would also check the quad align card and make sure the cables are plugged in tight to it and to the backplane. There is a large connector on the backplane that sometimes f
Electronics Forum | Sun Apr 03 00:16:56 EST 2005 | Haran
Can anyone advise how to determine the right hole diameter for a Press Fit connector's lead based on the lead compliant section?
Electronics Forum | Wed Apr 06 22:00:51 EDT 2005 | mrtom
I've delt with NexLev issues in the past. Contact me off line and I can share details. email= freemr_t@yahoo.com