Electronics Forum | Wed May 14 18:22:07 EDT 2014 | hegemon
Dave is touching on one of those magical things that keeps us process engineers well paid and dancing (Well, some of us, lol). Heavy boards with light components. Solder Follows heat. Component heat up earlier. Repeat, Solder follows the heat. Care
Electronics Forum | Thu Feb 16 02:03:36 EST 2017 | soldertraining
Reflow ovens and wave solder machines come in a huge variety of flavors and price points. These machines tell the story of impressive features and capabilities such as flux management, gas flow management, static pressure control, active cooling zone
Electronics Forum | Fri Apr 27 09:05:51 EDT 2018 | dszewczak
prompt) When we came back in the morning it was repeat scrolling an "ODD ADDRESS ERROR" on the monitor. I used a loopback to verify that the serial connections were good all the way to the control box. We tried uploading the main program to the ma
Electronics Forum | Fri Jun 29 03:49:26 EDT 2018 | seri09
Hi.i'm working with a screen printer EKRA E5 from 2001 and i have a problem with it. When i start the machine,the control option gets activated by itself and the CPU usage spikes to 100%. The machine works fine,but the problem is that i cannot turn o
Electronics Forum | Wed Nov 13 02:14:20 EST 2019 | elfridaauston87
I suggest you buy 8 zone oven, its best for baking and you can easily control overflow of heat, I am also using this, I recently bought it from https://www.reecoupons.com/categories/black-friday and I easily can control heat whether its overflow or n
Electronics Forum | Thu Jul 25 14:18:34 EDT 2019 | babe7362000
It's been awhile but I was wondering if anyone knows how to read the LED's on the Tep board to what they mean. Top 4 Red 1. blinking red 2. lit red 3. off 4. lit red 5. lit red 1. blinking green 2. not lit 3. lit green 4. off 5. off On the Gui
Electronics Forum | Wed Mar 11 15:16:27 EDT 2020 | sportsradar
Here is a few pictures. IMG_20200311_151400 shows the screen on the LC everything is fully booted on the LC before the machine is turned on. IMG_20200311_151350 shows the Siplace 80S15 waiting on LC IMG_20200311_151320 this screen is displayed when
Electronics Forum | Wed Jul 22 22:19:07 EDT 2020 | kghadiya
Hello Experts, I am using Heller 1707EXL in my shop. From last 2 months I have faced component missing and flying problem. I tried everything to figure out the problem i.e. change solder paste, re-calibrate PnP machine, several oven recipe etc but s
Electronics Forum | Wed Apr 28 15:18:17 EDT 2021 | dilogic
24V feeders are very simple to interface. You have supply voltages (24VAC, 12VDC), status output and control input (advance). All signals are using 12V levels. To advance feeder pull control input to GND. Connect status output to +12V with a pull-up
Electronics Forum | Thu Feb 01 16:00:37 EST 2024 | dharmendra
I am facing a ppm fluctuation issue. The customer provides a limit of 600 to 1500 PPM in the Reflow process and it should be under spec. But we are facing the issue during the running production and the ideal state ppm flucate sometimes goes below 6