Electronics Forum | Sat Feb 10 17:12:03 EST 2001 | rpereira
I admit, 16 mil QFP printing is very challenging but if all your control factors (print speed, etc...) are setup correctly (through DOE) extremely high yields can be achieved and more importantly a repeatable and robust product will be manufactured.
Electronics Forum | Mon Feb 05 20:33:14 EST 2001 | davef
Could you be trying to find: Stevens Products 128 N. Park St E Orange, NJ 07019 973.672.2140 Ross Stevens? Dynamic Technologies (titanium cover w/ silicone jacket, pricey) Stevens makes a U-shaped strip of fiber-material that slips over gold fing
Electronics Forum | Wed Feb 14 17:16:23 EST 2001 | slthomas
From Kester's web site: "Flux cored solder wire has a limited shelf life determined by the alloy used in the wire. For alloys containing more than 70% lead, the shelf life is two years from date of manufacture. Other alloys have a shelf life of thr
Electronics Forum | Thu Feb 22 21:01:12 EST 2001 | davef
We don't do this, but if we had to and lacking better advice, for all components I�d dry pack according to J-STD-033, store in a low temperature and humidity controlled environment [maybe using some semicon fab inert storage cabinets], review the eff
Electronics Forum | Mon Mar 05 04:25:09 EST 2001 | genglish
Hi, SMTnetters � Does anyone have any information on waffle trays, is there an IPC guideline for the use of these? I am experiencing a universal GSM dumping trays with parts still in the trays and I suspect the tray data will require amending if the
Electronics Forum | Thu Mar 08 01:19:16 EST 2001 | Mike Moninger
The environment essentially defines the need for coating. "Inside" may mean inside a men's locker room with attendant high humidity or inside a climate-controlled clean environment. Conformal coatings offer protection against moisture, fungus, chemi
Electronics Forum | Mon Apr 09 13:28:06 EDT 2001 | slthomas
I've been wondering if I was the only person thinking this. There are so many print parameters that are programmable now on new machines (squeegee pressure, height, speed, snap-off settings, cleaning intervals) that the process would (in my oh-so-hu
Electronics Forum | Tue Apr 10 12:56:23 EDT 2001 | slthomas
Didn't you hear? Fendelaz went out of business and sold the rights to the Magnaplancil to Amahlmahay. Sure, all the standard variables still affect the print quality (aka registration and volume) but if the machine controls everything but paste di
Electronics Forum | Tue Apr 17 09:53:57 EDT 2001 | edylc
Hi Thrasher7, We called it wash boards, any misprint from screen printer was at tight control ..and those wash boards when being flow down to the line have an identifier /marker , is a matter on isolation of the problem..... But I still can't think
Electronics Forum | Tue Nov 28 14:56:00 EST 2000 | Ashutosh Agate
Thank you Dr. Abell for yr response. I am not sure if I have understood yr Point # 3 clearly. Are you suggesting that CBT run on Corporate Intranet (where Bandwidth, Accessibility etc.is under control) is the real answer in the current situation ? If