Electronics Forum | Tue Jan 25 11:40:48 EST 2011 | atiya124
Does anyone know How is Tamura Reflow Ovens? All the feed backs are appreciated.
Electronics Forum | Fri Apr 05 18:41:32 EDT 2019 | kylehunter
What specific novastar oven models? And what years were they?
Electronics Forum | Wed Jan 07 13:17:56 EST 2004 | James
We currently have 2 HVA 102 conceptronic reflow ovens. I ran 2 profiles on the 2 seperate machines. One of the oven ran 7 degrees lower than the other oven. I checked all the fans and they seem to running fine. I get no warning on the monitors.
Electronics Forum | Fri Apr 05 18:31:22 EDT 2019 | ttheis
I would really suggest staying away from novastar on their ovens- we had a really bad experience with two of their ovens being unable to maintain temperature properly. We ended up buying a used BTU VIP70 and it has been working out great. A Heller 18
Electronics Forum | Sat Jan 06 02:12:36 EST 2007 | backbenchers
i have 1 customer using our reflow oven, he is facing the problem that after taking the boards from reflow oven ICs & some resistors felt down.they are using our glue dispenser also, the glue is not fixed with the component. wht will be the solution
Electronics Forum | Mon May 13 03:12:47 EDT 2019 | reckless
For your operation you may want to consider this depending on the kind of boards you are doing. https://neodenusa.com/smt-reflow-ovens/neoden-in6 110V 3 Zone Smart Reflow Oven Neoden I don't think china ovens are truly industrial grade but you may
Electronics Forum | Thu Jan 08 11:06:40 EST 2004 | russ
If I read this correctly you have two identical ovens that were setup the same ie zone temps, fan speeds etc... when you ran the same board through each of them one showed a lower board temp. Is this correct? Is the temp of the board 7 deg. lower t
Electronics Forum | Wed Jun 13 15:56:35 EDT 2007 | ck_the_flip
I experienced this with a high-mass capacitor. I was able to turn down the bottom-side convection (around 50�C lower than each of the top-side heaters), and able to NOT lose any parts. I got the bottom-side part just slightly over liquidus, and min
Electronics Forum | Fri Oct 07 14:37:36 EDT 2005 | jimmyjames
Could I get some help please? I have a Heller 1700EXL, 7 zone oven and I'm trying to figure out a better way of off-loading my completed boards. What I have now is simply a small table at the exit of the oven with about an 8" drop from the top of
Electronics Forum | Mon Jun 13 04:26:00 EDT 2005 | Joris Groot koerkamp
For the lead free reflow process we tested with our Vitronics 500smr oven. To reach the high temperature of the lead free profile was no problem. We are not using an active cooling system so the pcb's are maby to hot wen the leaving the oven. Can an