Electronics Forum | Thu Aug 05 10:13:44 EDT 1999 | Boca
| We are installing a new reflow oven and I have been told that we do not need to vent the exhaust out through the roof since we have a false ceiling. All that is required is to vent above the false ceiling and that the air exchange is great enough t
Electronics Forum | Wed May 05 09:59:44 EDT 1999 | Erick Russell
Several of our customers use our Summit series equipment for this purpose. Our rework stations are used in proto labs to prove manufacturability. Consider it a low volume, semiautomatic pick and place and selective soldering reflow oven. Some low
Electronics Forum | Wed Jan 20 14:28:50 EST 1999 | Dave F
| I have a severe problem with flux residue being drawn up the vent ducts of my reflow oven. This residue reaches a critical mass then begins to flow down the ducts and becomes very messy. I run a no-clean process and use IR oven. Has anyone else o
Electronics Forum | Mon Oct 26 19:48:14 EST 1998 | Scott B.
| | What are the key feature to look for in buying a profiling product for Reflow ? | | | | Who's is the best and how much do these systems cost ? | | | | Thanks in advance. | | | | Hi Mark, | | I am currently the oven sector engineer for a larg
Electronics Forum | Mon Mar 16 04:46:25 EST 1998 | Grant Petty
We have just go another batch of PCB's from our loaders, and some of the boards are severely warped. The boards are PCI cards and one of the boards is 9mm out at one end. The PCB is 210mm long and 4 layers. I am wondering if anyone knows what could
Electronics Forum | Mon Mar 16 16:57:59 EST 1998 | Earl Moon
| We have just go another batch of PCB's from our loaders, and some of the boards are severely warped. | The boards are PCI cards and one of the boards is 9mm out at one end. The PCB is 210mm long and 4 layers. | I am wondering if anyone knows what
Electronics Forum | Mon Mar 16 09:07:14 EST 1998 | Justin Medernach
| We have just go another batch of PCB's from our loaders, and some of the boards are severely warped. | The boards are PCI cards and one of the boards is 9mm out at one end. The PCB is 210mm long and 4 layers. | I am wondering if anyone knows what
Electronics Forum | Thu Mar 05 16:29:22 EST 1998 | Brian Stumm @ ETS
| Can anyone advise a good starting point for a temp profile for | on 0.05" and 1206 component boards? These boards are simple | by todays standards and do not contain any fine pitch or | other special components. | Thanks in advance... | MM Be hap
Electronics Forum | Wed Aug 07 08:43:32 EDT 2002 | davef
Comments on copper plate temperature monitoring are: * Some people use this type of temperature monitoring to start the day as an element of an oven capability measurement and monitoring program. * Using a copper or other metal plate, like aluminum,
Electronics Forum | Thu Aug 19 12:35:27 EDT 2004 | rlackey
Hi Snehal, Here are some considerations for you: Will you be doing Lead free soldering in the near future? What level of throughput are you looking for - are you high volume, medium or low volume? What is the support network like in your area? W