Electronics Forum | Wed Oct 27 07:34:14 EDT 2021 | reinhardk
Hi, we have a DAGE Assure machine, and we are happy with the results it gives us. Even without proper teaching the results were good (for common part sizes). *With* proper teaching results are even better. Only in certain cases results are unusabl
Electronics Forum | Thu Jan 27 19:01:11 EST 2022 | Claude_Couture
We have to make several different kits containing 5,7 or 17 resistors (axial leads). These resistors are supplied in ammo boxes or reel. We used to cut the tape by hand with scissors, but we need to cut 10000's of these per week. Has anyone ever seen
Electronics Forum | Tue Aug 02 20:12:33 EDT 2022 | cbeneat
So these are XPE's? Are they CM402's or 602's? Are you using custom nozzles? We've had the same issues over the years. We've gotten our custom nozzles from Count on Tools, I actually have 10 new ones on the way. Slowing the placement speed, increasin
Electronics Forum | Tue Aug 16 14:03:00 EDT 2022 | proceng1
We currently use Aegis CircuitCam for our Production work instructions, and machine programs. I am looking for an alternative, as CC is no longer supported. We receive Gerbers (sometimes CAD files) and BOM from our customers. That is all that I can
Electronics Forum | Thu Apr 20 22:08:07 EDT 2023 | saucyshawn
Mycronic is very expensive. But it does have a lot of good options and feeder count. JUKI I have always found to be limited to number of feeders and flexibility of individual machines. If you are upgrading from MannCorp there may be better options
Electronics Forum | Thu Nov 23 04:58:55 EST 2023 | klauss
We have 30 LED PCBs. Only differences between them are size and led counts. there's about 10cm (3.9inches) between smallest and largest board. and leds start from 60 to 80 pcs. and all leds are the same My question is that, do i have to set 30 diffe
Electronics Forum | Thu Nov 30 16:18:28 EST 2023 | proceng1
We have a customer that at one point had a dozen LED boards that were all very similar in size. They used Aluminum boards and I found that the difference in thermal mass between the assemblies was negligible considering the largest difference was ac
Electronics Forum | Wed Feb 24 18:58:58 EST 1999 | Earl Moon
| | Can anybody give me the Pros and Cons of of using Cartridges over jars and/or vice-versa. Also, if using cartridges, what is the best way to keep the paste from seperating, short of buying a mixer that cost over $5000.00 | | Thanks, | | Bill |
Electronics Forum | Mon Feb 25 21:09:48 EST 2002 | davef
You are correct about a TCE [CTE] mismatch issues in ceramic packages. The coefficient of thermal expansion [ppm/�C] of major ceramic package elements are: * Silicon - 3 * Standard 92% alumina ceramic � 6.5 * FR4 board � 18-20 Several points are: *
Electronics Forum | Wed Apr 10 08:39:11 EDT 2002 | Alan W.
Here are some of the problems (and my pet peeves) that can be found during a machine set-up. I have run into each of these many times over the years. Wrong part value: This can usually be traced to a purchasing, incoming inspection, or kitting mist
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411