Electronics Forum | Wed Jul 13 07:37:56 EDT 2005 | ajaydoshi
In our cp643 some time OS ERROR occur. We are using MCS30. Any suggestion. ajay
Electronics Forum | Wed Jul 13 08:59:59 EDT 2005 | dougs
take a trace and send it to fuji for analysis.
Electronics Forum | Wed Jul 13 23:05:50 EDT 2005 | Ken
....you should have your treace analysis report in about...4 years.
Electronics Forum | Thu Jul 14 03:40:05 EDT 2005 | dougs
or send it to 3-D Engineering in the uk and get it next day.
Electronics Forum | Mon Jul 18 04:19:44 EDT 2005 | woodglass
How do we contact 3D Engineering ?
Electronics Forum | Thu Jul 14 04:11:16 EDT 2005 | zsver
What is written on the display at error type and error address. from error address you can find out where the error comes from.
Electronics Forum | Tue Feb 12 11:26:31 EST 2019 | aldrich17
Does anyone have any info. on an "E869" error code on a Phillips Topaz X SMT machine. Error screen shows "Nozzle down limit sensor is off in A-table YV100X:N2323 YV100XT:n2223 Please check sensor and remove to the cause of this sensor being off.
Electronics Forum | Wed Feb 17 12:19:41 EST 2010 | cyber_wolf
Remove the HIMV-134 card. Unscrew the piggy back memory card and re-seat it. See if that helps.
Electronics Forum | Sun Dec 17 22:23:46 EST 2017 | jmelson
Well, I fixed it. I had resisted taking the motor off because of the recalibrations that would be required. But, it got bad enough I had to. Under the microscope, I could see copper dust packed between the commutator segments. I removed that, and
Electronics Forum | Thu Jul 09 12:47:09 EDT 2009 | janz
Hello, We are using F4G software for our Fuji machines. We've 5 machines plug into PC. Recently we tried to connect PC to local network but this only after while close C/C server without possibility to reopen C/C server. Reseting PC gives C/C lice
