Electronics Forum | Fri Mar 04 18:28:21 EST 2011 | hegemon
First, I would inspect for lack of solder bridges from the center slug to the outside leads. I would then look for evidence that the solder paste has reflowed beneath the component, without leaving too much void percentage. Typically we allow up
Electronics Forum | Thu Feb 16 12:16:36 EST 2012 | jax
I would assume every EMS company runs into this issue on a daily basis. Before we get to how a machine handles it, I would recomend setting up an acceptance criteria with your board supplier... if you plan on accepting them at all. (ex. No more than
Electronics Forum | Fri May 04 13:42:11 EDT 2012 | spoiltforchoice
The Manncorp machines are Autotronik machines re-branded. These are Chinese built while pretending to be German, they are seemingly capable enough and do come in at very attractive price points. The FLX from Essemtec is in many ways a slicker machine
Electronics Forum | Thu May 31 21:45:48 EDT 2012 | davef
rsthompson ... if you're talking about bare boards IPC-5701, Users Guide for Cleanliness of Unpopulated PBC, Table 8 ||Bare board final surface finish Ions||Hot air solder level||OSP over copper||Gold over nickel Chloride||0.75 ug/cm^2||0.75 ug/cm^2
Electronics Forum | Sat Aug 18 16:54:35 EDT 2012 | vanco2001
A new software startup is looking for an opportunity to implement a Client/Server software solution for PCB Manufacturers. The software is for Order/Job Tracking in production. The software will be installed free of charge and a trainee will be train
Electronics Forum | Mon Apr 01 10:09:03 EDT 2013 | markhoch
It sounds as if you have your AOI set up off-line, and you're "AOIing" a sampling of the PCBs produced. If that’s the case, then the responsibility of who drives the inspection really depends on how you configure it. If it's based on the number of P
Electronics Forum | Mon Apr 29 14:36:26 EDT 2013 | bandjwet
I am trying to determine who out there is reballing devices below 0.4mm in pitch. We have been reballing as small as a 4-balled 0.15mm 4 mil ball diameter area array devices using an adhesive-backed reballing preform. 1. For such small devices we h
Electronics Forum | Tue May 07 14:57:40 EDT 2013 | davef
Tape & Reel, Reel suppliers: * Advantek advantek.com/products/packaging-reels.php * Peak International peakinternational.com/tape.html * Acrotech Southwest, Inc. - Kerville, TX; (830)896-6464, Fax: (830)896-8245, SBorroum@ktc.com acrotechplastics.com
Electronics Forum | Tue Jun 25 10:16:41 EDT 2013 | davef
Hi Ryan: I assume you mean reel ... the plastic thing that contains taped components. Tape & Reel, Reel suppliers: * Advantek advantek.com/products/packaging-reels.php * Peak International peakinternational.com/tape.html * Acrotech Southwest, Inc.
Electronics Forum | Fri Aug 02 18:30:45 EDT 2013 | hegemon
We use our Yestech and Mirtec to do that same thing. Verify the lead is in the hole and check the solder fillet. This is done as part of our normal solder inspection for mixed technology high runners. You may not be able to put together a program