Electronics Forum: csm (Page 1 of 42)

TIM-1000 Capabilities

Electronics Forum | Sun Nov 05 11:52:41 EST 2006 | csm

Can somebody let me know if Sanyo TIM-1000 pick and place can mount BGA's? and qty dots per hour of TDM-1000. I will apreciate your importants comments Regards.

FUJI CP64 Service in San Diego CA area

Electronics Forum | Mon Jul 13 09:34:32 EDT 2009 | csm

Dear all, we have an Fuji CP6-4000 we get some weeks ago, but it shows an error "Hardward NG and show some actions (Inch the axis to cancel the overtravel. Then switch the power off and restart the machine). We did but display same error. I would

CP6-4000 FUJI TECH in CALIFORNIA???

Electronics Forum | Mon Jul 13 10:04:06 EDT 2009 | csm

Dear all, we have an Fuji CP6-4000 we get some weeks ago, but it shows an error "Hardward NG and show some actions (Inch the axis to cancel the overtravel. Then switch the power off and restart the machine). We did but display same error. I would li

CP6-4000 FUJI TECH in CALIFORNIA???

Electronics Forum | Tue Jul 14 08:23:41 EDT 2009 | csm

Dear Jepoy I apreciatte your support, we will check and do all your recomendations an will let you know progress. Best Regards

CP6-4000 FUJI TECH in CALIFORNIA???

Electronics Forum | Fri Jul 17 07:50:32 EDT 2009 | csm

Dear Jepoy We check the oilmatic system and I found a relay is not working, it will arrive until tomorrow. We still have 2 errors and 1 message, we are taking time because we don't have the Fuji CP6-4000 manuals or electric diagrams. we get this ma

FCM 1 PROGRAMMING TRAINING

Electronics Forum | Mon Jul 11 18:56:59 EDT 2011 | csm

Dear All Can somebody recomend me a good Technician can train us in Phillips FCM 1 operation, maintenance, etc, we have 2 machines and want to make run, can be 2-3 Days only. Machines are in Mexicali BC Mexico, The Tech can be in California. Thank

Manuals for Assembleon FCM-2 and TECHNICIAN

Electronics Forum | Sun Jun 14 15:40:48 EDT 2015 | csm

Dear All We are looking some Phillips Technician can do programming for FCM-2 equipment and we are looking the Programming manuals and maintenance manuals. Can somebody help us, or can give us support to give maintenance and programming to some FCM

ALL SERVO DRIVERS DO NOT TURN ON FOR CP8-42

Electronics Forum | Wed Nov 02 16:35:20 EDT 2016 | csm

Dear FUJI Specialist, I need your HELP, we have an CP8-42-E and machine was working properly and from one day to another when we Turn ON the machine make all the startup and check all the list, when all is ready, you have to Puch Ready and automaticl

ALL SERVO DRIVERS DO NOT TURN ON FOR CP8-42

Electronics Forum | Thu Nov 03 14:27:57 EDT 2016 | csm

Dear Tom I appreciate your feedback, we checked all you mentioning and are OK, yesterday we found one card is Not turning ON. We are checking harneses solders etc.

ALL SERVO DRIVERS DO NOT TURN ON FOR CP8-42

Electronics Forum | Thu Nov 03 14:33:40 EDT 2016 | csm

Dear JummyB We noted that when the machine is initializing, and when all check step pass, we just push ready button and the main relay or contactor must be activated but is not, it looks like one Card in front of the machine where all the drivers ar

  1 2 3 4 5 6 7 8 9 10 Next

csm searches for Companies, Equipment, Machines, Suppliers & Information

Software for SMT

World's Best Reflow Oven Customizable for Unique Applications
SMT feeders

High Precision Fluid Dispensers
Circuit Board, PCB Assembly & electronics manufacturing service provider

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
Win Source Online Electronic parts

Best Reflow Oven