Electronics Forum | Sat Sep 05 08:14:50 EDT 2009 | propox
Hi Everybody, For this time I was using Philips CSM84V and VZ, now I bay Topaz and Emerald, nad I have ask for everyone, do anybody have manuals for this. Thanks for all help
Electronics Forum | Sun Jan 10 16:07:01 EST 2010 | propox
Hello I have guestion, we bought two topaz and emerald machines. We have a problem to make a pick and place files to this machines. Recently we were useing CSM-84VZ. Do You have any help for us? Thank You.
Electronics Forum | Sun May 16 00:07:58 EDT 2010 | tpappano
I have a Philips CSM84VZ. There are offset calibrations that compensate the X and Y distances from the camera to the heads and the beam pointer. Perhaps yours is similar and just needs a small Y adjustment for the beam pointer.
Electronics Forum | Thu Dec 09 19:18:00 EST 2010 | tpappano
I just take a piece of discarded cover tape and tie the two together with a square knot. It runs right through on my CSM84s
Electronics Forum | Tue Dec 14 19:46:01 EST 2010 | tpappano
Do you have any contact info? I would happily have this done, I just had no idea such service would be available for these older machines. Thanks, Tom
Electronics Forum | Fri Dec 17 10:48:55 EST 2010 | tpappano
Hi Jeff, Thanks for the reply! I should have no problem doing the installation, especially with actual proper replacement parts 8-) I will email you a little later today. Thanks again, Tom
Electronics Forum | Fri Jan 07 06:39:10 EST 2011 | jeffr
David, Oops, I made a mistake on that phone number... Should be +61-417386694. (Code 61 is correct for Australia). Regards Jeff
Electronics Forum | Fri Jan 07 11:08:08 EST 2011 | tpappano
Follow that same link I gave you for the sample files, there is a zip of a file transfer utility specifically for these machines. (I sent you an email, too) Enjoy, Tom
Electronics Forum | Fri Jan 07 12:01:29 EST 2011 | ercdave1
Tom, I got the the files, now i will make the cable and try it out. did you find the floppy drive in your machine? Thanks for the help David
Electronics Forum | Fri Jan 07 12:32:03 EST 2011 | tpappano
I'm just now headed for the shop, I'll take a look. Tom