Electronics Forum | Fri Aug 26 12:30:20 EDT 2005 | mfoster
Heller did a tall tunnel for a customer in Florida a few years ago for a very similar application. As I recall, it was 3". Marc Peo or Don DeAngelo at Heller shold remember the details.
Electronics Forum | Sun Aug 28 03:22:35 EDT 2005 | Leo_dektec
We have had this experience in China. Some of our customer produce aluminium radiator. They always ask us to design this type reflow oven for it.Because the large desire of the heat,we have to design the oven at a higher temperature.It's almost meet
Electronics Forum | Fri Sep 02 06:47:17 EDT 2005 | dougs
Is there a standard that we should aim for in respect to the strenght of the solder on SMT leads? We have a customer who are testing our product by pulling leads off of pads then returning them.
Electronics Forum | Fri Sep 02 08:52:36 EDT 2005 | davef
Dougs: What is the purpose of this test? Lately, we have had a lot of boards that do not withstand the Drive-Over The Board With A UPS Truck Test. We wonder is the is some relation between our test failures and your customer's.
Electronics Forum | Fri Sep 02 10:10:54 EDT 2005 | Mity-C
We had a customer who came in to discuss a solder adheasion problem on some sub-assemblies we were building for them. When they arrived, they put a sub assembly in a vise and hit it with a hammer. I was speechless to say the least...... C
Electronics Forum | Fri Sep 02 10:27:49 EDT 2005 | Rob
One of our customers picked up an assembly, dropped it on a concrete floor, then kicked it down the corridor. Broke his toe on the steel enclosure, & suffice to say never tried it again. Nothing like decent, documented & controlled scientific testi
Electronics Forum | Tue Sep 06 18:46:10 EDT 2005 | RoHS Ron
Hey Bob, Why don't you toss us your DFM manual, customer list and financials while you're at it:)
Electronics Forum | Fri Sep 23 08:24:24 EDT 2005 | Yogesh Beedkar
For extracting centroid you can use GC-PLACE or CAM-CAD but for it you need to ask the ASC file from your customer.
Electronics Forum | Tue Nov 01 05:50:58 EST 2005 | dougs
Ken, what software do you use to aid your programming process? i've seen programs like GC-PLACE which could help verify customers cad data and rotations prior to setting up on a line, are there any others that the forum would recommend looking at?
Electronics Forum | Wed Oct 26 11:21:16 EDT 2005 | Amol
Hi, does anyone know/have used rubber masking boots to mask connectors, headers etc. prior to conformally coating them? i would appreciate contacts for custom rubber boot manufacturers in the united states. Thanks, Amol