Electronics Forum | Tue Aug 10 06:58:48 EDT 2004 | dka123
dear all, kindly guide me for the use of space electronics hardware assembky of PQFPs and Cqfps, how to form the flat pack leads, bend for 240 pins of 20 mil pitch and what are the Mil standards for them.how to cut the lead guards.can we use FP5 elit
Electronics Forum | Thu Apr 09 17:13:23 EDT 1998 | Ryan J.
Has anybody heard of a shield to shield the cutter from flying leads during hand cutting of through hole components. If it collected the leads also that would be helpful. I am thinking of plexiglass or something that the board could be placed under.
Electronics Forum | Thu Apr 09 18:36:52 EDT 1998 | Steve Gregory
| Has anybody heard of a shield to shield the cutter from | flying leads during hand cutting of through hole components. | If it collected the leads also that would be helpful. | I am thinking of plexiglass or something that the board | could be plac
Electronics Forum | Thu Apr 09 18:02:03 EDT 1998 | Ron Beasley
| Has anybody heard of a shield to shield the cutter from | flying leads during hand cutting of through hole components. | If it collected the leads also that would be helpful. | I am thinking of plexiglass or something that the board | could be plac
Electronics Forum | Mon Jan 04 16:55:47 EST 2010 | dyoungquist
We use a HEPCO model 3000-2 (hepcoblue.com) to shorten leads on various through hole components before we solder them on a pcb. You will have to verify they have a die that works with your particular LED module. If they do, this is what I would rec
Electronics Forum | Mon Jul 12 23:57:40 EDT 2004 | haran
Does anyone have experience cutting lead for PTH component with the thickness of around 2 mm.?Any supplier that I can talk?Please advise.
Electronics Forum | Tue Jul 13 10:31:16 EDT 2004 | davef
No, experience, but a couple of comments are: * Your 2mm leads are proabably not ment to be trimmed. Consider returning these and buying components with shorter leads. [We know, we know. You have to build this piece of junk right NOW!!!! B-)] * I
Electronics Forum | Tue Feb 19 14:02:56 EST 2008 | scooter
I have done this in a past life. In my mind this is a step backwards. If all of your parts are placed by hand it will work.You will need to cut at the top of the solder to keep the leads form bending If any parts are auto inserted you will need to c
Electronics Forum | Thu Oct 28 14:27:22 EDT 2004 | jdumont
Hi all, I will be looking into ovens shortly for our conversion to lead free. I hear and understand why our Heller 1088 oven wont make the cut for lead free (4 zones isnt enough). Can anyone recommend a good mid range oven? We have been very happy
Electronics Forum | Mon Feb 18 08:56:44 EST 2008 | operator
It does exist. We used to have one here, but sold it. It was more of a manual process though. You put the assembled board on the work table and then set your cutting blade height. Then you manually moved the cutting blade around shearing off the TH l
.gif)
.gif)