Electronics Forum: cyberoptics spi se200 (Page 1 of 3)

CyberOptics SE200

Electronics Forum | Thu Oct 05 09:16:10 EDT 2006 | SWAG

Got it working...

CyberOptics SE200

Electronics Forum | Tue Oct 03 17:44:23 EDT 2006 | SWAG

I am trying to get a CyberOptics SE200 on line. Does anybody have any idea why the SMEMA interface is always telling the downstream machine that a board is available? It will not switch off no matter what running condition the machine is in - even

Height paste measurement

Electronics Forum | Mon Jul 29 09:24:30 EDT 2002 | pjc

Its nearly impossibile to get any Gage R&R on systems that require the operator to posisition the board to be measured. For this you need an automatic measurement system. There are many vendors out there in addition to CyberOptics, models SE 200 and

Cyberoptic Sentry 2000

Electronics Forum | Fri Jun 13 10:35:30 EDT 2008 | pjc

Its a bit of an old beast, it was replaced by SE 200 and is now discontinued (since 2004 I believe). Its a decent unit, but hard to achieve good repeatability on smaller deposits. Its also not reliable on small solderpaste below 20mil fine-pitch. Fai

Cyberoptics SPI SE300 Ultra

Electronics Forum | Thu Sep 24 07:25:34 EDT 2015 | anilwagh

I have Cyberoptics SPI SE300 Ultra machine purchased from auction. I need service/Electrical/Program manuals.

BGA Rework

Electronics Forum | Mon Apr 28 08:52:10 EDT 2003 | davem

Chrissie, I'm glad you (and your people) made it through the painful process of reworking all those BGA's. Hope all your boards sucessfully pass test. Now on to the larger issue. In my experience, the solder paste screen printing process is (along

CyberOptics AOI

Electronics Forum | Thu Apr 09 12:27:12 EDT 2009 | devgru

Hi Dominic, By any chance did you look at yestech? I have a couple of their systems and have one dedicated for SPI. A while back, I did look at the CyberOptics SPI system, and while a very good system, I couldn't get the ROI into a range that was goo

Cyberoptics SPI SE300 Ultra

Electronics Forum | Mon Oct 12 05:54:10 EDT 2015 | anilwagh

I have brought SE300 Ultra spi machine. Is it possible to crate new program on machine? or need offline software.

Which AOI /SPI System is the Best? Viscom S3088; Koh Young 8030 or Parmi Xceed

Electronics Forum | Fri Apr 01 17:24:08 EDT 2016 | jlawson

Yes VISCOM uses Cyberoptiocs for SPI as they have a great optic head, but VISCOMS Ultra 2D/2.5D/3D head is best in market, I would say much better than Cyberoptics from a technical specification perspective. Has heighest part 3D height image renderin

Which AOI /SPI System is the Best? Viscom S3088; Koh Young 8030 or Parmi Xceed

Electronics Forum | Fri Jan 22 12:52:38 EST 2016 | newtfly

I agree with 3DAOI.com, in that you should be looking at Cyberoptics. They have a great product if you MUST have both of these processes in line, and if you must have 3D AOI. If you are willing to go offline, and want to get both AOI and SPI in one

  1 2 3 Next

cyberoptics spi se200 searches for Companies, Equipment, Machines, Suppliers & Information