Electronics Forum | Wed Sep 17 10:28:05 EDT 2014 | travishemen
We had a Dek 265 LT that had a similar issue. We suspected it was a bad cable going to the camera as the issue always seemed to show up in the same X Y location. Have you tried swapping fiducial 1 and 2 to see if it is always the first fiducial or
Electronics Forum | Mon Jan 20 17:26:07 EST 2020 | sumote
I see what the issue is now. A previous owner has removed the slider from the machine. I can see where it was mounted (bare metal where it was originally mounted as opposed to the black paint/powder coat). Is this slider available to purchase to re
Electronics Forum | Tue Mar 02 12:50:12 EST 2021 | ttheis
I have a parts 265 horizon if you want it. Was told it needs a front rail sensor but lmk if you are interested. Will sell cheap, located in milwaukee area.
Electronics Forum | Wed Nov 06 06:34:26 EST 2019 | kylehunter
We have a DEK HORIZON 265 that seems to be having an issue with the pressure setting for the squeeges. It seems to have an override making the set point of the squeege pressure always be 5kg. I have it set to 12kg, but on the first print, it errors
Electronics Forum | Thu Feb 17 17:33:34 EST 2022 | mnorthey
Hi all, I have a Dek 265 Horizon that fails to print at the correct pressure. It fails pressure every pass. I am trying to Calibrate it with a PFR1200N pressure Tester which we use for our DEK 248 Printers. I am trying to build up the table height
Electronics Forum | Sat Nov 17 11:36:16 EST 2007 | etienne
On a Dek Horizon 03 the tact time for one panel measuring 400mm print stroke took me 16 seconds at a speed of 55mm/sec. I see no reason for reducing further tact time since loading and unloading PCBs from Pick & Place machines is relatively close.
Electronics Forum | Mon Mar 03 11:37:34 EST 2008 | lysik
OK I'm a tech and I would not start with replacing both a computer and a camera. spend as much time with tech support as possible via telephone that is what they are there for. If they can't help keep posting this message. The good old stand by is to
Electronics Forum | Tue Mar 04 10:54:50 EST 2008 | vikkaraja
I think so,but what do you mean if hard drive is ok. Please explain.Computer boots up ok and machine even goes through it's complete intialization steps. I was thinking the same way as you are to start replacing one componet at a time. what do you th
Electronics Forum | Thu Mar 06 09:19:53 EST 2008 | d0min0
Two way to check a HardDisk: 1. run a dedicated software check (each brand should have one soft) or run a test-benchmark that You can easily find on web 2. make "ghost" image of HD and then replace a HD with same size (GB) and put the image on new on
Electronics Forum | Mon Sep 15 10:22:45 EDT 2014 | island2013
Sounds like all the usual suspects have been replaced. How about some completely random thoughts. For this specific product, you mention it runs a few boards then fails out. Does it fail out on one specific fiducial on this product every time or i
