Electronics Forum | Wed Oct 13 17:05:02 EDT 2004 | kmakiya
I have seen stepper motors chatter or vibrate when it has lost one of its phases. You've replaced everything but the cable so I think you are right that it should be checked for an intermittent connection.
Electronics Forum | Mon Oct 18 10:55:17 EDT 2004 | DenisM
Check the ground plane for noise with a scope. Steppers are very sensitive to spurs and will step in response to noise. Resistance welders on the same ground loo[ can be a problem as can seam sealers etc. Denis M Manncorp
Electronics Forum | Mon Oct 11 17:06:55 EDT 2004 | M Deren
We have a DEK 260 with a intermittent table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving haphazardly in small increments back and forth or vibrates as if it wants to mo
Electronics Forum | Mon Oct 11 17:02:06 EDT 2004 | M Deren
We have a DEK 260 with a intermittant table align stepper motor problem. The machine will work fine for awhile and then one of the table align motors starts either moving hapazardly in small increments back and forth or vibrates as if it wants to mov
Electronics Forum | Thu Jan 17 07:05:39 EST 2008 | alternativesmt08
can someone help, password for dek 260 needed. cheers
Electronics Forum | Thu Jan 17 07:58:43 EST 2008 | chrisatae
Try DEK1. This should overide.
Electronics Forum | Tue Oct 16 11:24:59 EDT 2007 | mymiss
We have a DEK 260 and I believe that the touch screen has gone bad. Any suggestion as to where I can get a replacement?
Electronics Forum | Wed Mar 21 12:15:44 EDT 2012 | eps
We are looking for an English version eprom ( XP116 V1.07 )of a Dek 260 screen printer can anyone help
Electronics Forum | Fri Oct 26 08:29:03 EDT 2007 | pjc
Try this guy, maybe he can hook you up: http://www.dekhead.com/index.html
Electronics Forum | Mon Jan 30 17:42:50 EST 2017 | jrr3434
A few of the LEDs on the cameras of my stencil printer are really dim. I want to replace them and not have to buy a whole new light ring board. Does anyone know what kind of LED they are? Any info would be appreciated. Thanks.
.png)