Electronics Forum: dek 265 raise table error (Page 1 of 3)

DEK 265 Printer Error

Electronics Forum | Tue May 27 04:52:25 EDT 2014 | hemant_pang23

Need help to resolve the problem in DEK265 paste printer The error messages are as per following details 1. When switch on the Machine we are getting error message like " Rising Table Error" -Position error. 2.While loading the Mint we are get


Electronics Forum | Thu Dec 13 05:30:29 EST 2012 | sunyb123

i have facing a problem in dek 265 horizon that rising table position error ,please help in for solving this problem


Electronics Forum | Thu May 16 04:54:33 EDT 2013 | aj

Hi all, I have an intermittent problem on a 265 GSX printer. "Position error" on the rising table.. quite a lot of work has been done with no success. such as motor, break , encoder replaced....diagnostic checks etc.... Machine could run for a few

DEK 265 Printer Error

Electronics Forum | Tue May 27 15:11:13 EDT 2014 | dekhead

1. Rising Table Position error is, most commonly an issue of motor movement or sensor(s); Not receiving an expected input (sensor input / 'DONE' signal) in expected period of time. Try homing table in Diagnostics see if it moves and what movements ar

DEK 265 Horizon Servo Following Error

Electronics Forum | Thu Jan 04 11:07:59 EST 2018 | ilavu

Ray, Did you solve this problem? I am having same error on same model machine. My problem is, when camera axis moves to look at the first fiducial, camera hits to the cleaner and error comes up with rising table error, camera axis not home. Even log

DEK 265 Horizon Servo Following Error

Electronics Forum | Fri Jan 05 10:58:43 EST 2018 | ilavu

John, I just found out more detail. If my board stop position in x is bigger than 109mm, I get error from park position to board stop.This problem started after power loss. The error comes up system power down and after pressing system button "RISIN

Dek 265 GSX motor comms failure ...

Electronics Forum | Thu Sep 22 18:47:08 EDT 2011 | rodrigo

Hi all, We just got this machine and it is not fully functional. I read somewhere here that the folder mint has some useful stuff. I run mint and it said that it cannot communicate with card 0,1,2,3 (x1,x2,x3,x4). It said to make sure the cards are

DEK 265LT Rising Table Position Error

Electronics Forum | Tue Sep 19 15:15:42 EDT 2006 | bigdaddysoy9

Have you tried changing the motor?

DEK265 or DEK260 for high mix low volume ???

Electronics Forum | Mon Feb 20 17:56:46 EST 2006 | Chris

If you are running FR4 PCBs and not something exotic like Kapton flex circuits, I would go with the Dek 265 any day of the week. You will find that Dek supports the fully automatic printer much better than the semiautomatic printers like the 260, 24

DEK 265LT Rising Table Position Error

Electronics Forum | Sat Sep 16 15:47:08 EDT 2006 | dekhead

95% possibility to the ballscrew... which is no ones favorite to replace. As far as the table situation now. I'm guessing that you have verified that the motor has power and the brake is not engaged. Does it still give a position error? or does it g

  1 2 3 Next

dek 265 raise table error searches for Companies, Equipment, Machines, Suppliers & Information

FPC* - Fluid Pressure Control - Dispensing Pump

MSD Dry Cabinets
PCB Handling with CE

Outstanding liquid dispensing and UV curing, all within one platform, watch the video.

"Heller Korea"