Electronics Forum | Fri Feb 09 01:46:55 EST 2024 | erikfriesen
I have a 2005 DEK Horizon 02i, the cmos batt was dead, so I replaced, and reset the bios. The device hangs in initialization, eventually erroring out. The vision led's blink rapidly during this period. Also, the card shows an error in device manag
Electronics Forum | Fri Feb 09 01:47:15 EST 2024 | erikfriesen
Added error screenshots.
Electronics Forum | Fri Feb 09 19:23:31 EST 2024 | mistrthou
Excellent info. Glad ya found it.
Electronics Forum | Tue Feb 09 17:24:09 EST 2021 | smtusa
I have a DEK Horizon 02i. Is it easy to swap between Squeegee and cartridge system just by installing the Proflow head assembly?
Electronics Forum | Fri Feb 09 13:51:02 EST 2024 | erikfriesen
I've looked at the logs, its error 234. Looking backwards, I see where this has happened some time ago as well.
Electronics Forum | Fri Feb 09 14:49:04 EST 2024 | erikfriesen
Its looking like this was a CPU speed issue. The BIOS defaults to X3, and it needs X7.5 for the PCA-6180E CPU card.
Electronics Forum | Thu Jun 14 04:20:26 EDT 2007 | sami
Dear ERhard.Our placer are Universal Genesis machines and the screen printer is DEK Horizon 02i . for Maian board the tact time in the placer is about 14 Sec and the printer is about 22 Sec. Means there is a big waste time . for Front pannel we are u
Electronics Forum | Tue Jun 19 11:27:07 EDT 2007 | realchunks
But his placement machine time was 13-14 seconds. That's the goal. "Our placer are Universal Genesis machines and the screen printer is DEK Horizon 02i . for Maian board the tact time in the placer is about 14 Sec and the printer is about 22 Sec.
Electronics Forum | Mon Feb 19 19:31:24 EST 2024 | erikfriesen
Does anyone know where I can find the DB50 pinout to build an Upline SMEMA? Any chance it would be the same as the Downline? Exact machine is Horizon 02i.
Electronics Forum | Mon Jun 24 15:51:13 EDT 2024 | erikfriesen
Using horizon 02i, I'm trying to program the print area of a board outside of just the board width. It seems that print front and print rear limit has no effect on the print area. Any suggestions on a solution?
.gif)
