Electronics Forum: demagnetize (Page 1 of 1)

MyData Missing Placements

Electronics Forum | Fri Jul 13 16:52:24 EDT 2007 | jmelson

warning - not all stainless steels are non-magnetic! Quite a few alloys are magnetic, some as highly magnetic as ordinary steel. One quick test is to demagnetize the jaws. If you can find one of the old-style Weller soldering guns with the copper

Sony HandyCam 8mm tracking?

Electronics Forum | Mon Aug 05 11:08:22 EDT 2002 | Claude_Couture

You must try cleaning the heads with a wet head cleaner. Dry tape cleaner just scratches your heads. Demagnetizer is good to use after a good cleaning.

Magnet Fields v.s. Electronics

Electronics Forum | Tue Jan 27 07:56:15 EST 2004 | siverts

Don't forget the monitor's. There are only two ways to get out of this problem, if the monitor get's magnetizised: 1. Replace the monitor. 2. Turn in the monitor to a Tv-repairman that can do a de-magnetizing of the monitor.

SMT Component placed upside down

Electronics Forum | Tue Aug 02 11:58:44 EDT 2005 | GS

Are the pick up nozzles metal made (ironmagnetic material)? Some time magnetic residual on metal nozzles can generate pbm like that when chips terminations have nickel and when SOt or similar packages have terminal A42 alloy made. Time ago got pbm l

MyData Missing Placements

Electronics Forum | Mon Jul 16 12:13:51 EDT 2007 | fredericksr

Interesting, thanks for the info. All that I know right now is that running the jaws through an "el-cheapo" demagnetizer was one of the actions taken that resulted in a reduction of missing components. It is possible that this is not a dominant fac

SMT Component placed upside down

Electronics Forum | Wed Aug 03 10:01:39 EDT 2005 | GS

Hi Crishan, sorry, "pbm" is a short way to say problem. In the past ('89), we had same magnetic pbm also with metal nozlles on Dynaper MPS-2500. Some time, we found also chips received from supllier already magnetized. Solution was to put the r

MyData Missing Placements

Electronics Forum | Fri Jul 13 14:06:34 EDT 2007 | fredericksr

explaining the problem in full each time -> miscommunication/misunderstanding and disagreement). Additionally, I have not, until recently, admitted to tech support that we had modified our centering jaws. I have uncovered evidence that a slight m

  1  

demagnetize searches for Companies, Equipment, Machines, Suppliers & Information

Electronics Decoating Agent

Best Reflow Oven
Void free Reflow Soldering

ONLINE IPC Training & Certification
RETROFIT for More Effective Dispensing

Easily dispense fine pitch components with ±25µm positioning accuracy.
pcb assembly supplies

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.