Electronics Forum | Wed May 22 12:16:14 EDT 2002 | wister
Yes,stencil supplier can give me some suggestion.but all need to be verified again and again.if there is such software can tell us everything about the stencil design? verify if before it be made.I do think it will save time to launch NPI and save ti
Electronics Forum | Tue Jun 04 18:30:49 EDT 2002 | arzu
We want to perform a "design of experiments" session to determine the optimum settings for our pasteprinter.We will design a stencil with decreasing aperture-sizes to make it measurable where the printing stops. The result should be a measureable pri
Electronics Forum | Fri Jun 21 13:05:58 EDT 2002 | surinder
Hi Stephan, Thanks,Yes there are thieving pads on Ic's .Also the two QFP, which mention,that will be removed by modifying the design in long run ,if the results/Yields are okay as with Glue as Compared to solderpaste process. Yes you are right here,b
Electronics Forum | Fri Oct 04 11:25:49 EDT 2002 | Bob Willis
If you want some additional material on 0201 design and assembly the SMART Group Committee produced one of its Charity Reports with all the money raised going to the Red Cross USA September 11th Appeal. You can get it from the SMTA Main office, it fe
Electronics Forum | Fri Oct 11 05:49:16 EDT 2002 | jason
Hi, Recently I am given a task to perform a drop test on a cardboard tote box. Inside is 180 pcs of assembled PCBA with cardboard dividers. But it was unable to withstand the drop test and thus the some of the boards are damaged. Does anyone ha
Electronics Forum | Thu Oct 17 01:00:41 EDT 2002 | fdr4prez
Craig, If you have a Juki KE-750/760, or the newer KE-2000s, it will support 8 characters for the designator. The older models only support 5 characters. If you have a KE-750 and/or a KE-760 and you can only enter 5 chars, then call you local Juki
Electronics Forum | Fri Oct 18 15:53:52 EDT 2002 | ereno
Hello All, I need some help here. Can anyone point me in the right direction on how to get SMT component design requirements? What I'm looking for specifically is how the component leads would come off the components to make contact with the SMT pad
Electronics Forum | Thu Nov 07 15:12:46 EST 2002 | davef
Converting BGA to PGA. Yes!!! Wouldn't want progess in packaging design to slow us down, would we? [Haaaaa. Just kidding. Probably has something to do with legacy designs; form, fit and function; and all that stuff.] Tacky flux only, like a rew
Electronics Forum | Fri Dec 20 09:01:27 EST 2002 | russ
Greetings, Does anybody out there have any experience with 0306 capacitors (not 0603). I am trying to find a pad design for this component. I have searched the archives to no avail. The component is .06 long by .03 wide with .007" solder terminat
Electronics Forum | Mon Jan 06 11:05:54 EST 2003 | Randy Villeneuve
I am not sure what parts you are inserting, i.e. radial, axial. The first thing I would do is to make sure the design can be automated. There are design guidelines from Universal and others that are good in determining if the parts can be placed and
