Electronics Forum: detect (Page 1 of 57)

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 09:10:57 EST 2018 | dekhead

What sensor are we talking about? Detecting entering / exiting machine? Detecting at load position? That is not part number but presumably connector number, but not locating in dwqs.

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 09:22:15 EST 2018 | dekhead

Maybe info you need?

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 00:15:41 EST 2018 | sabeti

Hi Everybody, We have a dek 265 LT screen printer which unable to detect the plate. I think that it might be the light barrier sensor with the part number of 13pl14. I cannot find a new sensor so I thought I can use a jumper to connect the black wir

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 09:43:31 EST 2018 | dekhead

Sorry, you said LT... correct dwg. On LT (assuming not very early software version), you can discount that sensor by selecting "Center Justified" for screen image...

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 18:42:03 EST 2018 | sabeti

Hi There, Thanks for your reply. Yes, this is the sensor which is creating the problem currently. The sensor is faulty. Is there any way to bypass the sensor to get the machine running? Thanks

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 18:56:19 EST 2018 | dekhead

If always on... you will need to write product file as edge justified, and position stencil properly before auto-clamping takes place. If always off... you will need to write product file as center justified... and position stencil and acknowledge st

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 19:09:04 EST 2018 | dekhead

Island SMT showing in stock. http://islandsmt.com/product/front-and-back-stencil-sensor

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Tue Nov 20 21:13:32 EST 2018 | sabeti

Hi there, I have found another sensor and replaced it but the display still shows as "Insert Screen and Retry". Do you know what the issue would be? Thanks

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Wed Nov 21 00:14:25 EST 2018 | leeg

As Dekhead has said, sounds to me like you have the wrong setting in your screen choice within the program, is it edge or centre justified?

dek 265 LT screen printer unable to detect the plate

Electronics Forum | Wed Nov 21 09:10:11 EST 2018 | dekhead

Are you seeing the stencil operational (changing state) in diagnostics? If sensor works then, look at image justification in product file...

  1 2 3 4 5 6 7 8 9 10 Next

detect searches for Companies, Equipment, Machines, Suppliers & Information