Electronics Forum | Fri Jun 20 08:04:21 EDT 2014 | emeto
0.8m/min is a different story. I run my 10 zone reflow ovens with that speed all the time and never had a problem. For the short profile I mentioned the speed I used is even higher(about 1.25m/min). No issues with parts moving. Regards, Emil
Electronics Forum | Mon Jul 14 07:27:06 EDT 2014 | sherine
Hello,my question as below: 1. If the component is black color but the color of PCB is dark green. It seem no different in color between it. Any suitable algorithm can be used on it? 2. Algorithm Mem1-Mem2 make many false error and affect the First P
Electronics Forum | Tue Jul 22 21:49:10 EDT 2014 | edriansyah
OK/NG will cost you a licence update, but it is powerfull. You can used the area color algorithm, as an alternative Black and Green have different RGB value, so it will not be mixed. You will need to tune it for a few board, set the minimum and maxim
Electronics Forum | Thu Jul 31 08:46:16 EDT 2014 | kurtiss
We currently have a CP4-3 that is having the nozzle change alarm on different holders. there was a part found in the machine and I do not know if it is part of the machine or not, see picture. Any advice on what this part is or how to resolve this is
Electronics Forum | Wed Aug 20 13:29:42 EDT 2014 | kkay
We have a small board that we run large quantities of. Unfortunately we cannot get them in a panel as it is an all aluminum board. Has any one successfully come up with a way to print boards in a pallet? These have fine pitch on them and the pallets
Electronics Forum | Mon Sep 01 13:46:11 EDT 2014 | max83
Yes, MC-24 and YS-24 are same platform, because Assembleone was selling Yamaha`s machines under name Assembleone till 2012 in the EU, Assembleone was distributor Yamaha in the Europe. Now Assembleon and Yamaha different machines. YS machines not so
Electronics Forum | Thu Oct 02 15:17:22 EDT 2014 | arifa_anees
you can find it on different sites, for refernce some are given below: www.keller-druck.com/picts/pdf/engl/man_gsm2_e.pdfCachedSimilar https://www.sparkfun.com/.../CEL-09533-User's%20Manual.pdf www.cybrotech.co.uk/.../Manual/GSM-SA%20User%20Manual
Electronics Forum | Tue Sep 30 12:16:23 EDT 2014 | tech1
Check your pad sizes against the supplier recommendation. I have noticed that these LED packages are very light and easily move around during reflow. Human nature has us checking the profile and making changes when in fact it is usually something els
Electronics Forum | Wed Oct 15 23:49:42 EDT 2014 | padawanlinuxero
Rob, I couldn't write it better, really sometimes we mess up a pristine surface mounted pcb with the nasty ol'flux, but anyway a flying probe is that a set of needles touching a pristine surface of a pcb, to test different components, try in youtube
Electronics Forum | Tue Oct 14 08:27:32 EDT 2014 | kkay
We use a few different style of press fit connectors, terminals, studs, etc. We use a tabletop arbor press for most everything we do, but a lot of times we will see some measling or slight delamination around the holes for the press fit part. Is ther
