Electronics Forum | Mon Apr 09 13:16:57 EDT 2018 | harlymh
Would you recommend a Yamaha Pick and place? In terms of reliability, accuracy, cph? We're looking for a pick and place that can deliver a 50 micron accuracy. What brands do you recommend for high accuracy placements?
Electronics Forum | Thu Nov 06 11:12:57 EST 2008 | janz
Hello, One of our pick and place machine uses rietschel vaccum pump. It is making lot of noise. I am in searching alternative solution which could be venturi pumps. Does anyone has experince in changing vaccum pump to venturi system.? What should
Electronics Forum | Mon Nov 10 14:26:16 EST 2008 | slthomas
It'll just transfer the load to your compressor, and who knows how efficient your venturi pump (which can also be noisy) will be (IOW, how much load it puts on your compressor is anyone's guess)? I'd just replace or rebuild the vacuum pump, person
Electronics Forum | Mon Jan 31 12:15:32 EST 2000 | Neil
I am looking for a Mydata users group, one possibly located in the Chicago area. If such a group does not exist, I would be more than happy to help start one. I have an older Mydata TP9 (non-UNIX) machine, with weak (yet expensive) support from the m
Electronics Forum | Mon Nov 10 13:27:07 EST 2008 | evtimov
Hi janz, you should be aware of everything. You are going to change subsystem on your machine. How much vacuum you need on the machine? Can you control the vacuum level with your system? Can you control the the system at all? Is it really much more
Electronics Forum | Tue Apr 10 02:57:53 EDT 2018 | rob
Yes I would, most of our old Yamaha machines (before 2005) will do 30-35 microns @ 3 sigma with the fine camera option. Our Jukis with His res camera's will hit it too. You should be OK with most things after 1997 with the right camera choice (whic
Electronics Forum | Thu Jul 27 15:34:48 EDT 2000 | Craig
Does anybody know much about or had any experience with Samsung pick and place machines, in particular the CP45FV, CP40L and LV. They seem a cheaper option, but apart from the agents we cant find anyone with much to say about them.
Electronics Forum | Fri Mar 27 14:37:49 EDT 2009 | hcglitte
Has anyone any experience with pick and place machines from http://www.mechatronic-systems.com?
Electronics Forum | Wed Jul 29 12:58:35 EDT 2015 | pankyb1261
Is there anyone that makes a pick and place glue dot for surface mount chip components (B stage epoxy dot in a carrier tape)? Thanks, Rich
Electronics Forum | Sun Feb 13 16:28:00 EST 2011 | tpappano
Does nozzle #1 lower at all when it should pick up a part or is it just staying in the fully up position? If it does come down, but not quite far enough to contact the part, there are adjusting nuts on top of the head that set the lower limit for no
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA United Arab Emirates
Phone: 978 790-2774