Electronics Forum | Fri Feb 24 15:11:18 EST 2006 | stepheniii
It's been a while, but I thought it was set up with on the screen, and not with dip switches. I'm sure with later models it was but can't remember the menu selections to do it.
Electronics Forum | Wed May 03 11:39:44 EDT 2006 | Chunks
"and dip it in your solder bath for 10-20 seconds." Do you pre-tin them first or just dip them in regular solder? "You can't talk to molten solder, but surfactant will listen." "Remember, we're all in this together."
Electronics Forum | Sat May 11 15:43:55 EDT 2013 | anvil1021
Hello Again...SMTNET....are there rules to determine which small BGA devices are Dip Fluxed or Solder pasted? What drives the decision? Obviously the device's pitch has a large bearing on this decision. Any and all comments or experiences would be ve
Electronics Forum | Mon Apr 21 10:50:13 EDT 2014 | cyber_wolf
The top PoP part is what gets dip fluxed or dip pasted. We have had warping issues with these components before but it is almost always the top part. My guess would be bad components if your reflow profile and print process is good to go.
Electronics Forum | Thu Apr 21 15:46:33 EDT 2016 | vchauhan
Has anyone used Fuji Dip Fluxer? How would you validate the process? Any help greatly appreciated.
Electronics Forum | Tue Sep 10 16:03:34 EDT 2019 | slthomas
If you are talking about a DIP package Hepco (www.hepcoblue.com) is advertised on this site for lead forming equipment (they do have a DIP trimmer) and Bomir can be found elsewhere.
Electronics Forum | Fri Jan 31 10:54:32 EST 2020 | rvines1
One concern with DIP insertion is making sure the operator inserts the correct tube into the correct feeder. Has anyone ever tried pick-to-light or anything similar?
Electronics Forum | Mon Nov 02 13:27:17 EST 1998 | smd
| | I am looking for suppliers of through-hole DIP insertion. It's been a long while since I've looked for through-hole equipment and am not aware of who manufactures DIP insertion equipment. If you know of some suppliers, I would appreciate some i
Electronics Forum | Tue Nov 15 10:19:27 EST 2005 | James
Can I dip the populated board in flux and achieve good results? Also how easy is it to clean the flux off the board afterwards if it is waterbased? Do you simply brush the board with a damp brush or spray some remover on the board? I also have this q
Electronics Forum | Mon Jan 24 12:11:00 EST 2011 | fdr4prez
Has there been any studies on the effect of the depth of the fluxing cavity for dipping PoP components? I've heard that the cavity should be 50% of the ball diameter and I also heard that the cavity should be 2/3 of the ball height (which may or may
