Electronics Forum | Thu Jan 30 07:29:15 EST 2020 | richardcargill
Finishing off tidying up/ cleaning a DEK 265 mk1 and inside ( front/centre ) are 4 silver pots and a pressure gauge. All the labelling is unreadable. I know the gauge is sort solvent dispensing, but no idea on what the pots adjust. Can anyone shed a
Electronics Forum | Thu Feb 13 03:54:57 EST 2020 | majdi4
we are obliged by customer specifications that there will be no glue despensing process on the production line.. also that the glue dispensing process is very complicated for this case .. we could have glue splash on top surface of pcb so that will
Electronics Forum | Wed Jan 20 07:31:58 EST 2021 | denism
Hi, Option 3 is quite often used, while it is better to glue with uv glue using uv lamps for curing. For this process, two inverters are needed in the line, a dispenser for UV glue and a UV lamp (eg metronelec UV CURE OVEN). It is better to use prefo
Electronics Forum | Wed Oct 19 00:17:53 EDT 2022 | proy
Has anyone here experience with re-purposing a Camalot dispenser (dos based 90's vintage)? It is a really robust and accurate gantry, would like to create programs to raise and lower a spindle mounted to the head - the 1414 I have has fudicial camer
Electronics Forum | Tue Jul 18 16:14:45 EDT 2023 | daniel_stanphill
I remember having seen an ad on LinkedIn or somewhere that showed a handheld pen capable of manual deposits even on 0402 and 0.4mm fine pitch pads. I have been trying to search for it today and am seeing some comparable products but nothing that look
Electronics Forum | Mon Jul 24 15:50:51 EDT 2023 | proceng1
I am going to be using a pressurized dispenser for Chemtronics CM1 peelable mask. I need to find a solvent that will work for flushing the system. I tried Xylene that we have here and it does ok, but not as good as I'd hoped. It works very well fo
Electronics Forum | Sun Aug 13 10:49:23 EDT 2023 | kirill
Usually, for big connectors like this, you can use a red smt glue under the connector with a dispenser. If its not possible, you can use the same red glue and put a small dot on the side of the connector after reflow, and heat it a bit with blower, 1
Electronics Forum | Tue Mar 21 20:33:09 EST 2000 | Dave F
Shane: We don�t dispense, but we have thought about it. Several points about peelable solder masks in a no-clean (low residue) process: � Beware of latex peelable solder mask with a low res process without extensive testing. The problem is usuall
Electronics Forum | Tue Aug 10 15:56:30 EDT 1999 | Jason Gregory
Has anyone ever heard of this? I have a Camalot System 5000 and we were in a pinch to produce some prototype boards. We needed Sn62Pb36Ag2-no clean in a dispensing mesh. All I could get my hands on was some Interflux paste in a jar. The formulation i
Electronics Forum | Thu Apr 01 03:04:22 EST 1999 | Scott Davies
Dave, Thanks for the interest. Basically, we looked at this project as a straight swap, i.e. printing the glue on the PCB using a Dek screen printer instead of our current method of dispensing glue using a Camalot dispensing machine. For the PCB we
