Electronics Forum: dispensers (Page 1 of 107)

SMT glue dispensers

Electronics Forum | Tue Nov 07 23:53:52 EST 2006 | mike white

Panasonics HD range of glue dispensers are good for this kind of job. I suppose the placement machines you have may also determine the dispenser machine. If you have Panasonic placement machines for example a Panasonic HD machine may fit into the foo

SMT glue dispensers

Electronics Forum | Mon Oct 02 11:23:04 EDT 2006 | ccapezza

EFD, Inc. manufactures adhesive dispensing equipment and may be able to offer assistance with your application. Check out our product information at http://www.efd-inc.com. We manufacture dispensing equipment ranging from manual dispensers to XYZ b

SMT glue dispensers

Electronics Forum | Wed Nov 08 09:03:42 EST 2006 | pjc

Check out Camalot. They have a new machine, the FX-D that can do both glue and solderpaste dispensing and underfill for the future http://www.speedlinetech.com/camalot/index.aspx

Solder paste dispensers question

Electronics Forum | Thu Apr 26 18:03:50 EDT 2007 | dilogic

Does anybody have a practical experience with solder paste dispenser for small-scale production (prototypes, or 10-20 pcs. batches)? What ptich size is realistic? Let's say that the speed is not an issue, but the quality is. - Deni

SMT glue dispensers

Electronics Forum | Wed Sep 20 16:14:20 EDT 2006 | flipit

Asymtek (Nordson), Precision Valve, Creative Automation, GPD, IJ Fisnar, Janome

SMT glue dispensers

Electronics Forum | Wed Sep 20 16:23:13 EDT 2006 | realchunks

Can you change your process to screen printing?

SMT glue dispensers

Electronics Forum | Thu Sep 21 14:29:58 EDT 2006 | realchunks

Gotcha, I used to be in charge of a pneumatic gun that clipped and bent the leads. Hand held units that worked rather well. The operators where very good at aiming the clipped lead too! Anyway, you may want to visit Panasonic, they have/had a disp

Solder paste dispensers question

Electronics Forum | Fri Apr 27 11:23:40 EDT 2007 | pjc

You can get reliable solderpaste dots down to 20-30mil dia. with Type 3. Accurate and repeatable dispensing machine for X-Y-Z placement of the dot is critical. Here are the leading machines: http://www.speedlinetech.com/camalot/index.aspx http://

Solder paste dispensers question

Electronics Forum | Thu Apr 26 20:18:45 EDT 2007 | hegemon

For what it is worth, we are purchasing a dispensing system including a Robotic Arm, Positive Displacement Valve (as opposed to volumetric displacement) and Controller. We have purchased this unit for doing lead free 20 mil dots at 30 mil pitch in s

SMT glue dispensers

Electronics Forum | Thu Sep 21 13:27:09 EDT 2006 | jimmyjames

We 'bend and clip' with good old fashioned needle nose pliers and side cutters. A typical size for a run would be 20-30 boards. Many of our designs are over a decade old and are fully TSO'd (FAA standard) and we can't change anything in the design.

  1 2 3 4 5 6 7 8 9 10 Next

dispensers searches for Companies, Equipment, Machines, Suppliers & Information

Dispenser Pumps

High Precision Fluid Dispensers


Want to know where to find the best AOI system? - Read testimonials.
High Throughput Reflow Oven

One-stop Platform For All Your Need For SMT - QYSMT